Induztr
Engineering Digest Document Viewer Related Models

Agilent 7900 ICP-MS Brochure

Contents

  1. Overview pp. 1-2
    Introduces the 7900 ICP-MS and its key benefits
  2. Spec p. 3
    Describes hardware innovations delivering analytical performance
  3. Overview p. 4
    Explains ease-of-use and operational design features
  4. Overview p. 5
    Covers the ICP-MS software platform and functionality
  5. Config p. 6
    Lists optional accessories and upgrades for extended capability
  6. Services p. 7
    Describes Agilent CrossLab support and service offerings

Engineering Facts

14 facts · every claim linked to a page
Selection

The standard UHMI capability lets the instrument routinely handle samples up to 25% TDS, 100x the traditional ICP-MS limit, so high-matrix samples need no dilution.

Determines whether your sample matrix fits the instrument without dilution and whether UHMI is mandatory for your lab.

Source
“The standard Ultra High Matrix Introduction (UHMI) capability enables you to routinely measure samples containing up to 25% TDS.”
Performance

The orthogonal detector gives 11 orders of magnitude dynamic range, so trace and percent-level elements can be measured in one run without over-range results.

Affects method design and whether you need separate dilution runs for majors versus traces.

Source
“The new Orthogonal Detector System (ODS) delivers up to 11 orders of magnitude dynamic range, from sub-ppt to percent-level concentrations.”
Performance

Sensitivity exceeds 10^9 cps/ppm at CeO below 2%, which supports ultratrace detection limits.

Key selection criterion when low detection limits are the deciding requirement.

Source
“>109 cps/ppm sensitivity at <2% CeO”
Performance

The instrument performs 10,000 separate measurements per second, enabling fast transient signal work such as single-particle and single-cell analysis.

Determines suitability for chromatography, nanoparticle, single-cell, and laser ablation applications.

Source
“The 7900 ICP-MS provides ultrafast data acquisition, with 10,000 separate measurements per second.”
Operation

The ORS4 cell gas controller switches cell gas in under 3 seconds, so multi-mode methods run faster.

Affects throughput and method design when switching between no-gas and He modes.

Source
“Temperature-controlled collision/reaction cell with a new gas controller for fast cell gas switching in less than 3 seconds.”
Maintenance

The torch auto-aligns with the interface after maintenance, reducing realignment effort and drift.

Simplifies routine maintenance and reduces operator-dependent performance variation.

Source
“The torch auto-aligns with the interface following maintenance.”
Installation

The 27 MHz frequency-matching RF generator tolerates changing matrices and even volatile organic solvents without destabilizing the plasma.

Matters when selecting the instrument for organic solvent or variable-matrix workflows.

Source
“Even volatile organic solvents can be introduced without affecting plasma stability.”
Installation

Standard cones are Ni with optional Pt-tipped cones, and they are screw-threaded for easy removal during maintenance.

Influences cone material choice for HF or high-matrix samples and maintenance planning.

Source
“Standard Ni, or optional Pt-tipped cones increase ion transmission and matrix tolerance. Screw-threaded for easy removal during maintenance.”
Installation

A single split-flow turbo pump plus external rotary pump optimizes interface vacuum, raising sensitivity and matrix tolerance.

Affects lab services and footprint planning for the vacuum system.

Source
“A single, high-performance split-flow turbo pump and external rotary pump optimize vacuum in the interface region”
Selection

The compact benchtop design is the smallest ICP-MS system and still allows easy access for servicing.

Relevant for bench space planning and service access in tight labs.

Source
“The world’s smallest ICP-MS system saves valuable bench space while ensuring easy access for servicing and maintenance.”
Selection

The SPS 4 holds up to 360 samples and the SPS 6 up to 540, enabling longer unattended runs.

Autosampler capacity drives throughput planning and walk-away time.

Source
“The SPS 4 holds up to 360 samples, while the SPS 6 holds up to 540 samples, for longer unattended runs.”
Selection

The I-AS autosampler suits ultratrace and small volumes of 0.5 mL with up to 89 vials plus 3 rinse vials.

Determines whether limited sample volume workflows are feasible.

Source
“Ideal for ultratrace analysis and small sample volumes (0.5 mL). Flexible rack configurations offer a maximum capacity of 89 vials, plus 3 rinse vials.”
Installation

The inert sample introduction kit is O-ring free and made from PFA for low contamination, HF resistant and suitable for high-purity reagents.

Required when running HF-containing or high-purity samples; affects configuration at purchase.

Source
“Inert sample introduction kit is O-ring free, and manufactured from PFA for low contamination levels. HF resistant and suitable for high-purity reagents.”
Operation

The Advanced Dilution System automates pre-run and post-run dilutions, including real-time reactive dilution of over-range samples.

Reduces manual dilution errors and contamination while cutting operator time.

Source
“It also automates post-run sample dilutions for over-range samples using real-time reactive dilutions during the analysis.”