Induztr
Engineering Digest Document Viewer Related Models

Performance of the Agilent 7900 ICP-MS with UHMI for High Salt Matrix Analysis

Technical Reference Summary

Covered Models & Document Scope

Application note on the Agilent 7900 ICP-MS with UHMI (Ultra High Matrix Introduction) for high salt matrix analysis; covers direct measurement of samples up to percent-level TDS, with UHMI dilution factors up to 100; no product ordering variants.

Technical Data

Parameter Value Condition
RF Power 1600 W p.3 ↗ 7900 ICP-MS with UHMI
Sampling Depth 10 mm p.3 ↗ 7900 ICP-MS with UHMI
Dilution Gas 0.58 L/min p.3 ↗ 7900 ICP-MS with UHMI
ORS Gas 6 mL/min p.3 ↗ H2 cell mode
Stabilization 5 s p.3 ↗ He cell mode
KED 3.0 V p.3 ↗ H2 cell mode
Spray chamber temperature 2 °C p.3 ↗ quartz spray chamber
Injector diameter 2.5 mm p.3 ↗ 7900 ICP-MS with UHMI
TDS limit (conventional ICP-MS) 0.2 % p.2 ↗ direct measurement, conventional ICP-MS
UHMI dilution factor 100 x p.3 ↗ UHMI dilution

Operating Limits

  • Maximum TDS for direct measurement by conventional ICP-MS: 0.2% (2000 ppm, 2 g/L) p.2 ↗
  • Maximum salinity of hypersaline waters discussed: > 40% (Don Juan Pond) p.2 ↗
  • UHMI dilution factor: up to 100x p.3 ↗