Induztr
Engineering Digest Document Viewer Related Models

An Integrated Workflow for Automated Calculation of

Technical Reference Summary

Covered Models & Document Scope

Application note describing an integrated automated workflow for ADC DAR determination using the Agilent AssayMAP Bravo, Agilent MassHunter Walkup, and Agilent MassHunter BioConfirm DAR Calculator software with an Accurate-Mass TOF LC/MS system; covers intact and reduced ADC, glycosylated and deglycosylated sample conditions.

Technical Data

Parameter Value Condition
LC/MS system Accurate-Mass TOF LC/MS p.3 ↗
Ion source Dual Agilent Jet Stream p.3 ↗ Intact ADC
Ion source Dual Agilent Jet Stream p.3 ↗ Reduced ADC
Gas temperature 325 °C p.3 ↗ Intact ADC
Gas flow 13 L/min p.3 ↗ Intact ADC
Gas flow 13 L/min p.3 ↗ Reduced ADC
Nebulizer 60 psig p.3 ↗ Intact ADC
Sheath gas temperature 350 °C p.3 ↗ Intact ADC
Sheath gas temperature 350 °C p.3 ↗ Reduced ADC
Sheath gas flow 12 L/min p.3 ↗ Intact ADC
Sheath gas flow 12 L/min p.3 ↗ Reduced ADC
VCap 4,000 V p.3 ↗ Intact ADC
VCap 4,000 V p.3 ↗ Reduced ADC
Nozzle voltage 2,000 V p.3 ↗ Intact ADC
Nozzle voltage 2,000 V p.3 ↗ Reduced ADC
Fragmentor 400 V p.3 ↗ Intact ADC
Skimmer 65 V p.3 ↗ Intact ADC
Mass range 800–8,000 m/z p.3 ↗ Intact ADC
Scan rate 1.0 spectra/sec p.3 ↗ Intact ADC
Scan rate 1.0 spectra/sec p.3 ↗ Reduced ADC

Operating Limits

  • Autosampler thermostat temperature: 5 °C p.3 ↗
  • Sample incubation temperature: 50 °C for 10 minutes p.2 ↗
  • ADC storage temperature: –80 °C p.2 ↗