Title page, legal notices, guide overview, and table of contents
Overviewpp. 6-7
Introduction to the home screen and PCR program editing
Overviewpp. 8-9
Prerequisites and preparatory information before installation
Specpp. 10-11
Provided materials, fluids, and reagents required for operation
Specp. 12
Electrical and environmental ratings of the instrument
Specp. 13
Description of the status indicator LED behavior
p. 14
Technical support contact information and procedures
Procedurepp. 15-17
Step-by-step instrument installation and power connection
Procedurep. 18
Procedure for exchanging the thermal block
Procedurepp. 19-20
Guidance on preparing and loading samples
Specp. 21
Recommended Agilent plasticware and consumables
Procedurepp. 22-23
Starting up the software and initial setup steps
Procedurepp. 24-28
Managing and editing user accounts and permissions
Procedurepp. 29-31
Configuring network settings and remote access options
Procedurepp. 32-34
Configuring cycler name and general instrument settings
Procedurepp. 35-42
Creating, editing, and tips for PCR programs
Procedurepp. 43-50
Detailed description of program steps and commands
Procedurepp. 51-52
Accessing and using preloaded PCR programs
Procedurepp. 53-54
Editing and copying PCR program steps
Procedurepp. 55-56
Running PCR programs and incubation protocols
Procedurep. 57
Accessing and viewing run reports
Procedurepp. 58-60
Troubleshooting common issues such as condensation and blank screen
Procedurepp. 61-64
Instrument maintenance and software update procedures
p. 10table, 7 rows
p. 21table, 6 rows
p. 51table, 8 rows
p. 13table, 4 rows
p. 14table, 21 rows
p. 22table, 6 rows
p. 23table, 2 rows
p. 24table, 3 rows
Table 1 Materials Provided
Part
Quantity
SureCycler 8800 instrument base
1
Thermal block unit (96-well or 384-well)*
1
Power cord
1
USB external drive**
1
Functional test certificate
1
Quick Start installation poster
1
CD with Setup and User’s Guide PDF
1
* The thermal block units are sold separately as part numbers G8810A (96-well block) and G8820A (384-well block). **The USB external drive is provided for transferring files to and from the cycler as needed. We recommend using this drive for all file transfers on the cycler.
Table
Agilent Part Number
Description
401333
96-well plate, 25-pack
410188
384-well plates, 50-pack
410186
Adhesive sealing films, 100-pack
410187
Compression mats, 10-pack
410082
Strip tubes, 200 l, 80 strips of 12
410086
Strip tube caps, 80 strips of 12
Table 5 Description of the preloaded PCR programs for the 96-well SureCycler 8800
QuikChange Lightning Multi Site-Directed Mutagenesis Kit
95°C for 20 seconds
55°C for 30 seconds
65°C for 2 minutes
QuikChange Multi 4kb target.pcr
QuikChange Multi Site-Directed Mutagenesis Kit
95°C for 1 minute
55°C for 1 minute
65°C for 8 minutes
Table 2 Appearance of the status indicator LED
Appearance
Instrument Status
Off
The cycler is idle.
Blinking green
The cycler is running a program or incubation.
Solid green
The cycler is paused.
Blinking red
The cycler has detected an error. Check the display for an error message containing further details.
SureCycler 8800 Technical Support
Contact
Region
Details
Email
USA and Canada
techservices@agilent.com
Email
Europe
tech_europe@agilent.com
Email
Japan
email_japan@agilent.com
Email
All other countries
techservices@agilent.com
World Wide Web
www.genomics.agilent.com
Telephone
USA and Canada
(800) 227-9770
Telephone
Europe
Telephone
Japan
0120-477-111
Telephone
All other countries
Go to www.agilent.com/genomics/contactus.
Telephone
Austria
01 25125 6800
Telephone
Benelux
02 404 92 22
Telephone
Denmark
45 70 13 00 30
Telephone
Finland
010 802 220
Telephone
France
0810 446 446
Telephone
Germany
0800 603 1000
Telephone
Italy
800 012575
Telephone
Netherlands
020 547 2600
Telephone
Spain
901 11 68 90
Telephone
Sweden
08 506 4 8960
Telephone
Switzerland
0848 8035 60
Telephone
UK/Ireland
0845 712 5292
Table 3 Home Screen Button Descriptions
Button
Description
New Program
Use this button to create a new PCR program.
Programs
Opens the file directory to browse stored PCR programs. Use this button to edit or run programs.
PCR Wizard
Use this button to create a new PCR program using a guided Wizard.
Network Control
Use this button to connect to multiple instruments via a network.
Incubate
Starts a single temperature incubation for a predefined period or for an indefinite hold.
Reports
Opens the report directory allowing you to browse for stored report files.
Table 3 Home Screen Button Descriptions (continued)
Button
Description
Login
Opens the Login screen.
Settings
Use this button to adjust cycler settings, upgrade software and manage user accounts.
Table 4 Access levels
Access Level
Functions allowed
Guest
• Access rights to the Guest folder
• Creating, copying, editing and executing programs stored in the Guest folder
User
• Access rights to the Guest and personal folders
• Creating, copying, editing and executing programs stored in the Guest and personal folders
Administrator
• Access rights to all Guest and user folders
• Setup and maintenance of user accounts
• Setup and maintenance of cyclers
• Archiving/maintenance of all reports
Engineering Facts
14 facts · every claim linked to a page
Safety
The instrument must be unplugged before cleaning major spills, servicing electrical/internal components, or swapping the thermal block.
Defines mandatory lockout step before maintenance or block exchange to avoid electric shock.
Source
“Unplug the instrument before you clean any major liquid spills and before you service any of the electrical or internal components or swap out the thermal block.”
Safety
The instrument must never be run from an ungrounded outlet.
Requires a grounded AC outlet at the installation site.
Source
“Do not operate the instrument from a power outlet that has no ground connection.”
Safety
The thermal block, heated lid interior and vessels exceed 50°C and must not be touched; the lid stays closed until 30°C or lower.
Burn hazard governs user handling and lab safety briefing.
Source
“Do not touch the thermal block, inner side of heated lid and reaction vessels. These areas quickly attain temperatures of greater than 50°C.”
Safety
Only labware rated to at least 120°C may be used in the cycler.
Sets the temperature rating required when selecting consumables.
Source
“Do not use any materials (plates, sealings, foils, mats) which are not sufficiently temperature-stable (up to 120°C).”
Installation
At least 10 cm clearance must be kept around the instrument so ventilation slots stay free.
Determines bench layout and spacing to neighboring equipment.
Source
“The ventilation slots of the device must remain free to vent at all times. Leave at least 10 cm of space around the instrument.”
Installation
Ambient must be held at 20–30°C and 20–80% non-condensing humidity.
Defines the room HVAC envelope required for correct operation.
Source
“Keep the ambient temperature between 20°C and 30°C with humidity levels between 20% and 80% non-condensing.”
Selection
The electrical supply rating is 100–240 V, 50/60 Hz, 11 A, indoor use only.
Used to size the branch circuit and confirm mains compatibility.
Source
“Electrical supply 100-240 V, 50/60 Hz, 11 A”
Installation
The unit is ESD sensitive; discharges above 8000 V can disrupt the USB ports, so a grounded wrist strap is needed in high-static areas.
Requires ESD precautions during handling and installation.
Source
“Electrostatic discharges greater than 8000 volts may interfere with the normal operation of the USB ports on the instrument.”
Installation
The thermal block only locks into place when placed on the base in the correct orientation, pressed down on both sides.
Prevents improper seating that causes missing temperature display or failed program start.
Source
“The thermal block unit will only lock into place if it is placed on the instrument base in the proper orientation.”
Installation
The instrument must be connected to a grounded AC outlet via the rear power connector.
Confirms the required power connection point and grounding.
Source
“The instrument must be connected to a grounded AC outlet.”
Operation
Two interchangeable blocks exist: 96-well and 384-well.
Drives the block/format choice at purchase and the exchange procedure.
Source
“Two interchangeable thermal block units are available with the SureCycler 8800: the 96-well block and the 384-well block.”
Maintenance
Power must be off and the supply disconnected before removing the thermal block.
Mandatory step sequence for safe block exchange.
Source
“Power off the instrument and disconnect the power supply.”
Operation
Only the listed Agilent plates, strip tubes, sealing films and compression mats are compatible.
Restricts consumable selection to validated part numbers.
Source
“The following PCR plates, reaction tubes and sealing films are compatible with the SureCycler 8800:”
Operation
A compression mat must be used during the run to keep the sealing film adhered to the plate.
Prevents sample volume loss from sealed microplates.
Source
“Ensure a compression mat is used during the PCR run to keep the sealing film adhered to the plate.”