Analysis of Essential Oils Using Comprehensive Two-Dimensional Gas Chromatography (GC × GC)
Technical Reference Summary
Covered Models & Document Scope
Application note describing a GC × GC workflow for the analysis of essential oils using a flow modulator (RFM) combined with a high-resolution accurate-mass GC/Q-TOF system and FID detection; no product models, sizes or ordering codes are covered.
Technical Data
| Parameter | Value | Condition |
|---|---|---|
| Injection mode | Split; 250:1 p.3 ↗ | |
| Injection volume | 0.5 µL p.3 ↗ | |
| Inlet temperature | 300 °C p.3 ↗ | |
| Electron energy | 70 eV p.3 ↗ | |
| Emission current | 5 µA p.3 ↗ | |
| FID temperature | 300 °C p.3 ↗ | |
| FID H2 flow | 30 mL/min p.3 ↗ | |
| FID air flow | 400 mL/min p.3 ↗ | |
| MS carrier gas flow range | 1 to 2 mL/min p.2 ↗ | |
| Scanning mass analyzer maximum acquisition rate | near 20 Hz p.2 ↗ |
Operating Limits
- MS carrier gas flow constraint: 1 to 2 mL/min p.2 ↗
- Scanning mass analyzer maximum acquisition rate: near 20 Hz p.2 ↗