Induztr
Engineering Digest Document Viewer Related Models

Agilent Bond Elut PPL User Guide

Technical Reference Summary

Covered Models & Document Scope

Agilent Bond Elut PPL solid-phase extraction sorbent (proprietary modified styrene divinylbenzene polymer, 125 µm particle size). Document covers cartridges (200 mg/3 mL, 500 mg/6 mL) and VersaPlate tubes (100 mg) for polar and multitarget SPE method development.

Technical Data

Parameter Value Condition
Sorbent type proprietary modified styrene divinylbenzene polymer p.1 ↗
Particle size 125 µm p.1 ↗
pH stability stable at pH extremes p.1 ↗
Solvent compatibility wide range of solvents p.1 ↗
Cartridge sorbent mass 200 mg p.6 ↗ 12105005, 3 mL
Cartridge volume 3 mL p.6 ↗ 12105005, 200 mg
VersaPlate tube sorbent mass 100 mg p.6 ↗ 7531901C, 7551901C
Conditioning solvent methanol p.2 ↗ typical protocol step 2
Equilibration solvent water p.2 ↗ typical protocol step 3
Wash solvent 100% water or buffer p.2 ↗ typical protocol step 5
Elution solvent methanol p.2 ↗ typical protocol step 7
Acidic elution MeOH with 0.5% FA p.2 ↗ parallel elution A
Basic elution MeOH with 0.5% NH4OH p.2 ↗ parallel elution B
Drying time 30 seconds p.2 ↗ after wash and after elution
Recommended pH adjustment two units below pKa (neutral/acidic targets) or two units above pKa (basic targets) p.2 ↗ method development

Operating Limits

  • pH stability: stable at pH extremes p.1 ↗
  • particle size: 125 µm p.1 ↗

Ordering Data

Ordering Code Part No. Variant / Code Applies To Note
Bond Elut PPL cartridge, 200 mg, 3 mL p.6 ↗ 12105005
Bond Elut PPL cartridge, 500 mg, 6 mL p.6 ↗ 12255001
Bond Elut PPL VersaPlate tubes, 100 mg p.6 ↗ 7531901C Tubes need to be inserted into a VersaPlate base
Bond Elut PPL VersaPlate tubes, 100 mg p.6 ↗ 7551901C Tubes need to be inserted into a VersaPlate base