Induztr
Engineering Digest Document Viewer Related Models

Unichiller P100

Contents

  1. Overview p. 1
    Introduces the Unichiller P100 chiller and its main features
  2. Spec pp. 1-2
    Performance, temperature, and dimensional data per DIN 12876
  3. p. 2 table, 2 rows
  4. p. 1 table, 33 rows

Technical data according to DIN 12876

ParameterValue
max. ambient temperature40 °C
from Serial-No.:1.0/20

Unichiller P100 — Technical data according to DIN 12876

ParameterValue
Order-No.3059.0007.01
Operating temperature range-20...40 °C
temperature set point / display5,7" colour Touchscreen
Internal temperature sensorPt100
Sensor external connectionPt100
Temperature stability at -10°C0,5 K
Interface digitalEthernet, USB (Host u. Device), RS232
Safety classificationI / NFL
Cooling power at ambient temperature +20°C
at 20°C10 kW
at 0°C8,7 kW
at -10°C5,8 kW
at -20°C4 kW
Refrigeration machineair-cooled, CFC- and HCFC-free
Refrigerant (ASHRAE, GHS)R-449A (A1, H280)
Global Warming Potential (GWP)1397
Circulation pump:E2
max. delivery140 l/min
max. delivery pressure5,3 bar
Delivery at 2,8 bar126 l/min
Delivery at 3,0 bar124 l/min
Delivery at 3,5 bar115 l/min
Delivery at 4,0 bar103 l/min
Delivery at 4,5 bar83 l/min
Delivery at 5,0 bar43 l/min
Pump connectionG1 1/4 male
min. filling capacity18 l
Volume of expansion48 l
Overall dimensions WxDxH **740x1160x1165 mm
Power supply (3 Phase)460V 3~ 60Hz
Pressure equipment categoryArt. 4.3 PED
Degree of ProtectionIP20
min. ambient temperature5 °C

** Overall dimensions WxDxH

Engineering Facts

14 facts · every claim linked to a page
Selection

The chiller is rated for an operating temperature range of -20 to 40 °C, so the process must stay within these limits.

Defines whether the unit can cover the required process temperatures at all.

Source
“Operating temperature range -20...40 °C”
Performance

Cooling capacity drops with falling temperature (10 kW at +20 °C down to 4 kW at -20 °C), so size the unit for the coldest operating point.

Prevents undersizing when the process runs at low temperatures.

Source
“at 20°C 10 kW at 0°C 8,7 kW at -10°C 5,8 kW at -20°C 4 kW”
Performance

Cooling capacity is specified at 20 °C room temperature and may fall if ambient rises, so account for the actual installation room.

Ambient conditions in the plant room directly affect achievable cooling.

Source
“Output data valid for: Room temperature 20°C. If the ambient temperature rises, the cooling capacity may drop.”
Installation

The unit is air-cooled, so the installation site must supply adequate air flow and respect the stated space requirements.

Air-cooled chillers need clearance and ventilation to reject heat.

Source
“** Please respect space requirements. See operating conditions at www.huber-online.com”
Installation

The pump connection is G1 1/4 male, so hoses and fittings must match this thread.

Determines the connection hardware needed for the external circuit.

Source
“Pump connection G1 1/4 male”
Installation

The unit requires a 460 V three-phase 60 Hz supply, so the site power must match this configuration.

Wrong supply voltage or phase count makes the unit unusable.

Source
“Power supply (3 Phase) 460V 3~ 60Hz”
Installation

Voltage and frequency tolerances are ±5 % and ±2 % but must not be combined in the unfavorable direction, so verify supply quality.

Out-of-tolerance supply can trip or damage the compressor and pump.

Source
“Voltage + / - 5% with a simultaneous frequency tolerance of + / - 2%”
Compliance

External branch circuit protection per UL 489 is required, so the electrical installation must include it.

Mandatory for a compliant and safe electrical installation.

Source
“External branch circuit protection according to UL 489 required.”
Installation

Three-phase devices below 63 A are delivered with cable but without plug, so a suitable plug must be provided on site.

Affects the electrical hook-up scope and materials.

Source
“Three-phase devices with current consumption less than 63A --> with cable, without plug”
Safety

The refrigerant R-449A is classified A1 with GHS hazard H280, so refrigerant handling and ventilation rules apply.

Relevant for safety assessment and room ventilation requirements.

Source
“R-449A (A1, H280)”
Compliance

The refrigerant has a GWP of 1397, which matters for F-gas reporting and environmental compliance.

High-GWP refrigerant affects legal obligations and leak monitoring.

Source
“Global Warming Potential (GWP) 1397”
Operation

The unit is IP20, so it must be installed in a dry, protected location away from water and dust ingress.

IP20 limits where the chiller can safely be placed.

Source
“Degree of Protection IP20”
Operation

The minimum ambient temperature is 5 °C, so the installation room must not fall below this.

Cold rooms can prevent proper operation and starting.

Source
“min. ambient temperature 5 °C”
Maintenance

The expansion tank is atmospheric open and has a cover, so it must be checked and kept covered during operation.

Open expansion tanks need periodic level checks and protection from contamination.

Source
“cover expansion tank”