Induztr
Engineering Digest Document Viewer Related Models

COBRA BC 0601 G — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Busch COBRA BC 0601 G, BC 1001 G and BC 1200 A dry screw vacuum pumps — each an integrated package combining a screw backing pump with a mounted vacuum booster (canned motor) on a compact base frame. Data sheet covers performance, technical data and dimensional/consumable figures for the three models.

Section-by-Section Technical Breakdown

pp. 1
Product Overview and Applications

The COBRA BC series are dry screw vacuum pumps with a bell-shaped construction, patented self-balancing screws and an integrated vacuum booster. They are directly water-cooled with a directly mounted canned motor and combine backing pump plus booster on a compact base frame. Targeted at semiconductor and coating applications such as cold ALD, load lock/transfer chambers, metrology, lithography, PVD, RTA and oxide/silicon/metal etching.

  • Advanced screw design with patented self-balancing screws and bell-shaped construction
  • Integrated vacuum booster combined with backing pump on a compact base frame
  • Direct water cooling and directly mounted canned motor
  • Applications: cold atomic layer deposition, load lock and transfer chambers, metrology, lithography, PVD, rapid thermal annealing, oxide/silicon/metal etching
  • Positioned for low cost of ownership, minimal maintenance, long service intervals and high uptime
pp. 2
Technical Data (BC 0601 G / BC 1001 G / BC 1200 A)

Performance and connection data are given for air at 20°C with ±10% pumping speed tolerance, for 50 Hz and 60 Hz operation. All models reach an ultimate pressure of 0.003 hPa and use a 1.5 kW / 3000 min⁻¹ backing pump motor; booster motor rating and speed increase with model size. Noise level is 60 dB(A) per ISO 2151 for all models.

  • Nominal pumping speed: BC 0601 G 550/640 m³/h, BC 1001 G 870 m³/h, BC 1200 A 1200 m³/h (50/60 Hz)
  • Ultimate pressure 0.003 hPa (mbar) for all models at 50 and 60 Hz
  • Backing pump motor 1.5 kW at 3000 min⁻¹ for all models; booster motors 1.5 / 2.9 / 4.0 kW (BC 0601/1001/1200)
  • Booster speeds 3000/3600 min⁻¹ (BC 0601 G), 5400 min⁻¹ (BC 1001 G and BC 1200 A)
  • Power consumption at ultimate/idle: 1.25/1.35 kW (0601 G), 1.7/1.2 kW (1001 G), 1.9/1.3 kW (1200 A)
  • Cooling water minimum 3.0–4.0 l/min (0601 G, 1001 G), 4.0–5.0 l/min (1200 A)
  • Nitrogen purge 0–70 l/min (0601 G, 1001 G), 0–200 l/min (1200 A)
  • Weight approx. 320 kg (0601 G), 310 kg (1001 G), 360 kg (1200 A)
  • Dimensions L×W×H: 905×354×660 mm (0601 G), 1054×425×615 mm (1001 G and 1200 A)
  • Inlet/outlet: DN 63 ISO-K / DN 40 ISO-KF (0601 G), DN 100 ISO-K / DN 40 ISO-KF (1001 G), DN 160 ISO-K / DN 40 ISO-KF (1200 A)
  • Sound pressure level 60 dB(A) (ISO 2151, KpA = 3 dB) for all models
pp. 2
Dimensional Drawing and Pumping Speed Curves

Page 2 provides a dimensional drawing for footprint/installation planning and pumping speed curves plotted for 50 Hz (solid) and 60 Hz (dashed). Curves are measured with air at 20°C and carry a ±10% tolerance.

  • Dimensional drawing included for all three models
  • Pumping speed curves for 50 Hz and 60 Hz operation
  • Curves valid for air at 20°C, tolerance ±10%

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Ultimate pressure is 0.003 hPa (mbar) for BC 0601 G, BC 1001 G and BC 1200 A at both 50 and 60 Hz. p.2 ↗ Suitable for high-vacuum semiconductor processes (ALD, load lock, metrology) without a separate high-vacuum stage beyond the integrated booster. whole series
Nominal pumping speeds: 550/640 m³/h (BC 0601 G, 50/60 Hz), 870 m³/h (BC 1001 G), 1200 m³/h (BC 1200 A). p.2 ↗ Model selection by required throughput; 60 Hz gives ~16% more speed only on the BC 0601 G. whole series
Pumping speed tolerance is ±10% for air at 20°C. p.2 ↗ Size process plumbing and pump-down time calculations with this margin. whole series
Backing pump motor is 1.5 kW at 3000 min⁻¹ on all models; booster motors are 1.5, 2.9 and 4.0 kW respectively. p.2 ↗ Total connected electrical load ranges from ~3.0 kW (0601 G) to 5.5 kW (1200 A) for supply sizing. BC 0601 G / BC 1001 G / BC 1200 A
Booster speed is 3000/3600 min⁻¹ (BC 0601 G) but 5400 min⁻¹ for BC 1001 G and BC 1200 A. p.2 ↗ Higher-speed boosters on the larger models imply stricter dynamic balance/vibration service expectations. BC 1001 G and BC 1200 A
Power consumption at ultimate/idle: 1.25/1.35 kW (0601 G), 1.7/1.2 kW (1001 G), 1.9/1.3 kW (1200 A). p.2 ↗ Allows energy cost estimation at base vacuum and idle operation. whole series
Minimum cooling water flow is 3.0–4.0 l/min for BC 0601 G/BC 1001 G and 4.0–5.0 l/min for BC 1200 A (direct water cooling). p.2 ↗ Cooling water circuit must be sized before commissioning; no separate oil cooling loop is needed. whole series
Nitrogen purge consumption ranges 0–70 l/min on BC 0601 G/BC 1001 G and 0–200 l/min on BC 1200 A. p.2 ↗ For etching/ALD processes, N2 purge supply must cover up to 200 l/min on the largest model for dilution of corrosive/condensable species. whole series
Inlet/outlet connections: DN 63 ISO-K / DN 40 ISO-KF (0601 G), DN 100 ISO-K / DN 40 ISO-KF (1001 G), DN 160 ISO-K / DN 40 ISO-KF (1200 A). p.2 ↗ Exhaust lines can share DN 40 ISO-KF hardware across models; inlet flange must match the chosen model. whole series
Weights are approx. 320 kg (0601 G), 310 kg (1001 G) and 360 kg (1200 A). p.2 ↗ Lifting equipment and frame loading must be rated for ≥360 kg including rigging. whole series
Envelope dimensions 905×354×660 mm (BC 0601 G) and 1054×425×615 mm (BC 1001 G / BC 1200 A). p.2 ↗ Fit-in-place planning in semiconductor substories: the 0601 G has a notably narrower 354 mm width. whole series
Sound pressure level is 60 dB(A) per ISO 2151 (KpA = 3 dB) for all models at 50/60 Hz. p.2 ↗ Acceptable near process tools without acoustic enclosure in most fab environments. whole series
The pumps use a directly mounted canned motor and direct water cooling, dry screw operating principle with integrated vacuum booster. p.1 ↗ No lubricant in the pumping chamber — suitable for clean/corrosive semiconductor processes and oil-free applications. whole series