Induztr
Engineering Digest Document Viewer Related Models

IPE2 — product leaflet

Technical Reference Summary

Covered Models & Document Scope

Pfeiffer Vacuum IPE2 leak detector for demanding industrial leak testing (high-pressure valves and fittings). Document covers the base IPE2 unit plus options/spare parts: LeakTek software, Adaptive Test™, Leak Rx, expansion tanks (small/medium/large), precision pressure regulators, verification orifices (ECD/SE/ECS), remote exhaust valve, oil-free (0.07–0.15 or 0.3–0.8 bar abs.) and rough vacuum generation packages, remote pendant, mass extraction UUT filter, quick connectors.

Section-by-Section Technical Breakdown

pp. 1
Product Features and Capabilities

The IPE2 is positioned as a robust leak detector for demanding applications such as high-pressure valves and fittings, with long life cycle. It offers short cycle times for high throughput and flexible test configurations. It supports large parts and dual-channel operation combining vacuum and pressure testing.

  • Robust design for demanding applications, high-pressure valves and fittings, long life cycle
  • High performance: short cycle times, high throughput
  • Flexible: suitable for large-size parts
  • Dual channel combining vacuum and pressure testing
  • Digital and analog I/O interface
pp. 1
Accessories, Spare Parts and Options

A list of available accessories and options for the IPE2, covering software tools, vacuum generation packages, calibration orifices, and pneumatic/mechanical accessories. These items allow tailoring the tester to specific test volumes, supply quality, and integration needs.

  • LeakTek software; Adaptive Test™ utility tool; Leak Rx
  • Expansion tank small/medium/large
  • Precision pressure regulator small/medium volume
  • Verification orifice ECD, SE (ECD-X-PSE·X-P), ECS air calibration
  • Glass orifice calibrated at barometric inlet, vacuum outlet on primary standard
  • Remote exhaust valve with filter
  • Oil-free vacuum generation and control package (0.07–0.15 or 0.3–0.8 bar abs.)
  • Rough vacuum generation and control package
  • Remote pendant with on/off button
  • Mass extraction UUT filter; quick connector with plug
pp. 2
Technical Specifications

Key performance, supply, environmental and physical specifications of the IPE2, including sensitivity, pressure range, utilities requirements, interfaces, and dimensions/weight. Sensitivity is 1·10⁻⁴ sccs with pressure testing up to 500 psia.

  • Sensitivity: 1·10⁻⁴ sccs
  • CDA supply: air (pilot operated valves), quality 1.3.1 per ISO 8573-1
  • CDA pressure: 65–145 psig / 4.5–10 bar rel.; typical consumption 2 Nl/cycle
  • Pressure range: up to 500 psia
  • Power supply: 110/120 / 220/240 V AC (50/60 Hz); typical consumption 1200 W
  • Operating temperature 15–45 °C (59–83 °F); humidity 30–80 %
  • User interface: RJ45 Ethernet or RS232; software LeakTek (local or LDAP domain authentication); Windows 10 OS
  • Network: 1x LAN (RJ45); interfaces: USB, wired Ethernet
  • Weight approx. 127 kg (280 lbs); dimensions 686 x 610 x 483 mm (27 x 24 x 19 in)
pp. 3
Pneumatic Connections and Electrical Interfaces

Defines the pneumatic connection types and the electrical I/O characteristics for machine integration. Digital I/O are opto-isolated with different voltage classes for inputs/outputs; analog output provides 0–5 V DC pressure control on a single channel.

  • Pneumatic connections: 1/4" to 1/2" Swagelok (application dependent)
  • Digital inputs: 5 V DC, opto-isolated — start, stop, type, pressure switch, verify
  • Digital outputs: 30 V DC, 20 mA, opto-isolated — pass, fail, clamp, test type, exhaust, custom
  • Analog outputs: single channel, 0–5 V DC pressure control

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Leak rate sensitivity is 1·10⁻⁴ sccs. p.2 ↗ Suitable for production leak testing of high-pressure valves/fittings; not a fine vacuum helium-detector-class sensitivity — verify against part acceptance criteria before selection. IPE2
Test pressure range up to 500 psia. p.2 ↗ Enables high-pressure testing without external boosters; confirm UUT test pressure stays within this limit. IPE2
Requires clean dry air (CDA) per ISO 8573-1 quality class 1.3.1 at 4.5–10 bar rel. (65–145 psig). p.2 ↗ Plant air must meet class 1.3.1 (very dry/filtration level); an air treatment package may be needed if shop air quality is lower. IPE2
Typical CDA consumption is 2 Nl per cycle. p.2 ↗ Allows sizing of air supply capacity for high-throughput multi-cycle operation. IPE2
Power supply 110/120 or 220/240 V AC, 50/60 Hz, typical consumption 1200 W. p.2 ↗ Electrical hookup must provide ~1.2 kW per unit; check breaker/circuit sizing accordingly. IPE2
Operating conditions: 15–45 °C (59–83 °F), humidity 30–80 %. p.2 ↗ Install within an environmentally controlled area; avoid condensation and temperatures above 45 °C. IPE2
Runs Windows 10 with LeakTek software supporting local or LDAP domain authentication. p.2 ↗ Can be integrated into plant IT/user management; plan Windows 10 lifecycle and network security accordingly. IPE2
User interface via RJ45 Ethernet or RS232; additionally 1x LAN (RJ45) and USB. p.2 ↗ Factory automation/SCADA integration possible via wired Ethernet; RS232 available for legacy systems. IPE2
Weight approx. 127 kg (280 lbs); dimensions 686 x 610 x 483 mm (L x W x H). p.2 ↗ Plan lifting/handling equipment and bench/cabinet space; not a one-person move. IPE2
Pneumatic connections are 1/4" to 1/2" Swagelok, application dependent. p.3 ↗ Specify Swagelok fittings/tubing matched to the chosen configuration when planning installation plumbing. IPE2 (configuration dependent)
Digital inputs are 5 V DC opto-isolated (start, stop, type, pressure switch, verify). p.3 ↗ PLC inputs must drive at 5 V DC logic; use appropriate interposing modules for 24 V PLC systems. IPE2
Digital outputs are 30 V DC, 20 mA, opto-isolated (pass, fail, clamp, test type, exhaust, custom). p.3 ↗ Output signal capacity is limited to 20 mA — use relays for driving loads like stack lights or contactors. IPE2
Analog output is a single channel, 0–5 V DC for pressure control. p.3 ↗ Pressure monitoring via analog requires a 0–5 V DC input; only one analog channel available per unit. IPE2
Supports dual-channel operation combining vacuum and pressure testing on one unit. p.1 ↗ Mixed leak-test strategies (e.g., vacuum decay and pressure decay) can be consolidated in a single station, saving hardware. IPE2
Optional oil-free vacuum generation and control package available in two ranges: 0.07–0.15 or 0.3–0.8 bar abs., plus a rough vacuum package. p.1 ↗ Select the vacuum package matching the required test vacuum level; oil-free generation avoids contamination of UUT. IPE2 options
Expansion tanks (small/medium/large) and small/medium-volume precision pressure regulators are offered as options. p.1 ↗ Test volume and pressure regulation must be matched to part size at ordering time to achieve stable decay measurements. IPE2 options
Calibration/verification hardware includes ECD, SE (ECD-X-PSE·X-P) and ECS air calibration orifices, and glass orifices calibrated at barometric inlet/vacuum outlet against a primary standard. p.1 ↗ Plan periodic verification with these orifices for audit/traceability of test integrity. IPE2 options

Related models