ASM 340 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum ASM 340 helium/hydrogen leak detector series datasheet covering three variants: ASM 340 (rotary vane backing pump), ASM 340D (diaphragm pump, wet version), and ASM 340I (no backing pump). Accessories/options listed: interface boards, sniffer probe (5 or 10 m hose), helium spray gun, remote control, transport cart, inlet dust filter, bypass option, test chamber.
Section-by-Section Technical Breakdown
Highlights high sensitivity, ultra-fast response and short recovery time, wet/dry and pump-less variants, and a high-resolution color touch display with detachable control panel. A wide accessory range supports maintenance and production applications.
- Large variety of interface boards
- Sniffer probe with 5 or 10 m hose length
- Helium spray gun
- Remote control
- Transport cart
- Inlet filter for dust
- Bypass option
- Test chamber
Comparison of key specifications for the three variants: test method, detectable gases, sensitivity, pumping speed, power, inlet pressure, start-up, response, backing pump, interfaces, noise, and weight. All variants share the same sensitivity and dimensions.
- Test method: spraying and sniffing tests; detectable gases ⁴He, ³He, H₂
- Min. detectable leak rate (He spraying): 1·10⁻¹² mbar l/s; (sniffing): 5·10⁻⁹ mbar l/s
- Pumping speed for Helium: 2.5 l/s (all variants)
- Power supply: ASM 340: 100-110; 200-240 V (50/60 Hz); ASM 340D/I: universal 100-240 V (50/60 Hz)
- Max. power consumption: 850 W (ASM 340), 600 W (340D), 350 W (340I)
- Max. test inlet pressure: 25 mbar; start-up time (20 °C): 3 min; response time <1 s
- Backing pump: rotary vane (15 m³/h roughing) / diaphragm (3.4 m³/h) / none
- Operating temperature: ASM 340: 0-45 °C spraying / 0-35 °C sniffing; 340D: 0-35 °C; 340I: 0-40 °C
- Interfaces: I/O, RS-232, Ethernet (PC), Profibus, Ethernet-IP (depending on configuration)
- Sound pressure level: 54 dB(A) (ASM 340), 52 dB(A) (D and I)
- Weight: 56 kg (ASM 340), 45 kg (D), 32 kg (I)
Mechanical envelope and inlet port data are identical for all three variants. Dimensional drawings are provided for ASM 340, ASM 340D and ASM 340I.
- Dimensions (L x W x H): 594 x 375 x 389 mm (all variants)
- Inlet port: DN 25 ISO-KF (all variants)
- Ethernet-IP and other interface options depend on selected configuration
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Minimum detectable leak rate for helium in spraying test is 1·10⁻¹² mbar l/s (1·10⁻¹³ Pa m³/s) on all three variants. p.2 ↗ | Same ultra-high sensitivity regardless of variant; variant choice can be driven by pump type/power rather than detection performance. | whole series |
| Sniffing-test sensitivity is 5·10⁻⁹ mbar l/s, roughly four orders of magnitude worse than spraying mode. p.2 ↗ | For fine leak testing, use vacuum/spraying method; sniffing only for locating larger leaks on pressurized parts. | whole series |
| Max. test inlet pressure is 25 mbar. p.2 ↗ | Parts under test must be evacuated below 25 mbar before connecting; add a bypass or roughing stage for higher-pressure loads. | whole series |
| Helium pumping speed is 2.5 l/s and response time is <1 s. p.2 ↗ | Fast cycle times suitable for production-line leak testing. | whole series |
| Start-up time is 3 min at 20 °C. p.2 ↗ | Allow ~3 minutes warm-up before taking measurements after power-on. | whole series |
| Backing pump differs per variant: rotary vane with 15 m³/h roughing capacity (ASM 340), diaphragm with 3.4 m³/h (ASM 340D), none (ASM 340I). p.2 ↗ | ASM 340 suits fast roughing of larger volumes; ASM 340D is the wet/oil-free option; ASM 340I requires external roughing or pre-evacuated parts. | ASM 340 / ASM 340D / ASM 340I respectively |
| Max. power consumption: 850 W (ASM 340), 600 W (ASM 340D), 350 W (ASM 340I). p.2 ↗ | Size supply wiring/circuit accordingly; ASM 340I suits portable/battery-constrained setups. | all variants |
| ASM 340D and 340I accept universal 100-240 V, 50/60 Hz; ASM 340 requires 100-110 or 200-240 V. p.2 ↗ | D/I variants simplify deployment across regions; check variant when wiring fixed installations. | ASM 340D/ASM 340I vs ASM 340 |
| Operating temperature limits: ASM 340: 0-45 °C (spraying) / 0-35 °C (sniffing); ASM 340D: 0-35 °C; ASM 340I: 0-40 °C. p.2 ↗ | Verify ambient conditions at installation site; sniffing operation on ASM 340 derates to 35 °C. | all variants (variant-specific) |
| Communication interfaces: I/O, RS-232, Ethernet (PC), Profibus, Ethernet-IP, with Ethernet-IP depending on selected configuration. p.2 ↗ | Confirm required fieldbus option in ordering; PLC integration via I/O or Profibus/Ethernet-IP is supported. | whole series |
| Inlet port is DN 25 ISO-KF on all variants. p.3 ↗ | Standardize test-line hardware on DN 25 ISO-KF fittings and adapters. | whole series |
| Dimensions 594 x 375 x 389 mm; weight 56 kg (ASM 340), 45 kg (340D), 32 kg (340I). p.2 ↗ | Bench/cabinet space and handling (transport cart option) can be planned from these envelope figures; I variant is easily portable. | whole series |
| Sound pressure level is 54 dB(A) for ASM 340 and 52 dB(A) for D and I variants. p.2 ↗ | Acceptable for workshop/lab environments without special noise mitigation. | whole series |
| Sniffer probe is available with 5 or 10 m hose length; an inlet dust filter and bypass option exist. p.1 ↗ | Choose hose length per test station layout; use dust filter to protect the inlet in dirty environments and bypass for venting/roughing. | whole series |