The Cary 4000 covers 175–900 nm, so it is the right choice only when measurements stay within UV-Vis.
Wavelength range is the first selection criterion; choosing the 4000 for NIR work would be a mismatch.
Source
“Cary 4000 (175–900 nm)”
| Academia | Materials Testing & Research | Chem & Petrochem | Energy & Fuels | Food & Agriculture | Biotech & Pharma |
|---|---|---|---|---|---|
| Common applications for the Cary 4000/5000/6000i | |||||
| Thin film thickness analysis and anti-reflection coating analysis | Analysis of novel nanocomposite materials | Colour measurements and colour matching | Optical density measurements, e.g. optical filters and safety eye wear | Spectro-electrochemical measurements, for e.g. reduction of CO2 | Measuring suspensions and highly scattering samples |
| Analysis of heavy metals in water | Quantitative analysis of strongly absorbing liquid media or suspensions | Analysis of the functionality of photoresists | Measurement of oil yield in oil shale samples | Analysis of the reflectance properties of solar cells | Study of paints and effect of pigments in the automotive Industry |
| Assessment of crop condition, such as chlorophyll, water and dry matter content | Quantitative analysis of additives | QC applications | Measurement of turbid biological samples | Characterization of intracellular biochemical pathways | Analysis of potential sun blocking agents for sun cream and cosmetics |
| Common sampling techniques supported by the Cary 4000/5000/6000i | |||||
| Variable/fixed angle specular reflectance accessory | Double beam absolute specular reflectance accessory | Diffuse reflectance accessory (internal and external) | Praying mantis reflectance accessory | Brewster angle holder | Sample transport with film holder |
| Rear beam attenuator | Fibre optic accessory | Solid sample holder | Polarizer/depolarizer attachment | Rear beam attenuator | Rapid mix accessory |
| Fiber optic microprobe (liquids) | Thermostatted single and multicell holders with temperature probes | Microvolume cuvettes | Rapid mix accessory | Water thermostatted 6x6 multicell holder accessory | Single cell peltier accessory (accurate temperature control) |
| Cell holder for standard and specialized cells | Single cell peltier accessory (accurate temperature control) | Diffuse reflectance accessory (internal and external) | Water thermostatted 6x6 multicell holder accessory | Rapid mix accessory |
The Cary 4000 covers 175–900 nm, so it is the right choice only when measurements stay within UV-Vis.
Wavelength range is the first selection criterion; choosing the 4000 for NIR work would be a mismatch.
“Cary 4000 (175–900 nm)”
The Cary 5000 extends to 3300 nm and needs only one detector for NIR, simplifying the optical configuration.
Fewer detectors means fewer changeover mechanisms and a simpler, more reliable NIR setup.
“It requires only one detector to extend that performance into the NIR.”
The Cary 6000i is optimized for 1200–1800 nm with an InGaAs detector, so it is the pick for shortwave NIR resolution work.
If the application needs fine NIR bands near 1200–1800 nm, only this model meets the requirement.
“optimized for the shortwave NIR, delivering superior resolution in the 1200–1800 nm region.”
Signal-to-noise mode lets the user set a precision target across the scan and cuts scan time by more than half.
Affects throughput planning and method design for samples with strongly varying absorbance.
“S:N mode reduces scanning times by over 50% as the system scans quickly in areas of high energy throughput”
The monochromator and sample compartments can be purged separately, allowing a higher purge rate in the sample compartment.
Matters when installing gas purging for NIR or hygroscopic-sample work.
“allowing the sample compartment to be purged at a higher rate than the instrument.”
With reference beam attenuation the instruments can typically measure absorbance beyond eight.
Determines whether dilution steps can be avoided for strongly absorbing samples.
“the instruments can typically measure absorbances beyond eight.”
The LockDown mechanism fixes accessories reproducibly in the sample compartment without tools or alignment procedures.
Reduces setup time and variability when swapping accessories during installation or method changes.
“eliminate tools and time- consuming alignment procedures.”
Lamps are pre-aligned and easy to replace, and the electronics accept a wide range of lamp designs.
Shortens downtime and simplifies spare-part planning for lamp replacement.
“Lamps are pre-aligned and easy to replace.”
Silica overcoated optics allow cleaning without damaging the reflective surface.
Affects cleaning procedures and long-term optical reliability in dusty or humid labs.
“Protects optics from the environment and allows cleaning without damage to the reflective surface.”
The sample compartment has a removable floor plate for flexible mounting of large or odd-shaped samples.
Needed when planning mounting of uncut glass, wafers or large accessories.
“Includes removable floor plate for maximum flexibility when mounting samples.”
The VASRA scans the angle of incidence automatically under PC control while translating the sample so the same region is measured at every angle.
Enables reproducible reflectance-versus-angle measurements for coating and thin-film work.
“the angle of incidence is automatically and accurately scanned under full PC control.”
Complete IQ/OQ qualification services are offered for hardware, software and accessories.
Required for regulated labs needing documented installation and operational qualification.
“Agilent offers complete qualification services (IQ/OQ) for the Cary 4000/5000/6000i Series UV-Vis-NIR hardware, software and accessories.”