Introduces the 8900 ICP-MS and interference control in single quadrupole mode
Overviewpp. 3-4
Describes the first triple quadrupole ICP-MS and technology advancements
Specp. 5
Summarizes performance characteristics of the 8900 system
Overviewp. 6
Explains low sulfur and silicon analysis capability
Overviewp. 7
Describes ORS4 collision/reaction cell with axial acceleration
Overviewp. 8
Covers single nanoparticle analysis capability
p. 9
Concluding summary of the 8900 ICP-MS benefits
Engineering Facts
13 facts · every claim linked to a page
Selection
Reaction mode on a conventional single quadrupole is unreliable because there is no mass filter before the cell, so the reaction chemistry varies with sample composition.
Determines whether a single quadrupole can be used at all for reactive-gas methods or whether an ICP-QQQ with Q1 is required.
Source
“reaction mode does not offer a reliable solution on conventional single quadrupole ICP-MS, because such instruments do not have a mass filter before the CRC”
Performance
Q1 rejects non-target masses so the ions entering the cell are independent of matrix, making reaction chemistry predictable and detection limits better for challenging applications.
Justifies the ICP-QQQ selection when reactive cell gases and matrix-independent accuracy are needed.
Source
“Q1 rejects non-target masses, so the ions that enter the cell are independent of the sample matrix composition”
Performance
The 8900 offers increased matrix tolerance up to 25% dissolved solids, higher sensitivity, lower S and Si backgrounds, and more flexible cell gas options.
Key selection criterion for high-matrix sample types and for trace S/Si work.
Source
“It offers increased matrix tolerance (up to 25% dissolved solids), higher sensitivity, lower backgrounds for S and Si, and more flexible cell gas options.”
Selection
UHMI aerosol dilution extends matrix tolerance up to 25% total dissolved solids on the Standard and Advanced Applications configurations.
Confirms which configuration supports high-TDS samples without additional dilution hardware.
Source
“UHMI uses Agilent’s proprietary aerosol dilution technique to extend matrix tolerance up to 25% total dissolved solids (TDS)”
Performance
A new interface vacuum stage raises ion transmission and sensitivity by up to a factor of two versus the 8800.
Quantifies the sensitivity gain relevant to trace-level detection limit requirements.
Source
“Sensitivity is increased through a new interface vacuum stage, which improves ion transmission, increasing sensitivity by up to a factor of two compared to the 8800.”
Selection
The ORS4 four-channel cell supports a wider range of reaction gases, and axial acceleration further boosts sensitivity on Advanced Applications and Semiconductor configurations.
Determines whether the chosen configuration can run the required cell gas methods.
Source
“The fourth generation, four channel ORS4 collision reaction cell increases flexibility by supporting a wider range of reaction gases.”
Performance
The on-axis high-gain detector supports fast TRA with minimum dwell times of 0.1 ms for single nanoparticle characterization.
Required selection point if spICP-MS nanoparticle analysis is in scope.
Source
“A new on-axis, high-gain electron multiplier detector supports fast TRA acquisition, with minimum dwell times of 0.1 ms to enable single nanoparticle characterization (spICP‑MS).”
Selection
The semiconductor configuration uses an s-lens giving higher sensitivity in hot plasma and reliable cool plasma, while the x-lens suits high-matrix hot plasma work.
Lens choice must match the application, so it drives configuration selection.
Source
“This “s-lens” provides higher sensitivity under normal hot plasma conditions than the “x-lens” used on the Standard and Advanced Applications configurations, and also supports reliable cool plasma performance.”
Performance
Inert materials in the gas flow path reduce S and Si background, enabling a verified detection limit specification of 50 ppt for S, Si, and P.
Critical for selecting the instrument for trace sulfur, silicon, and phosphorus analysis.
Source
“This update has successfully reduced the background signal for S and Si, allowing a DL specification of < 50 ppt for S, Si, and P to be set”
Operation
Axial acceleration in the ORS4 speeds slow product ions to overcome scattering and space-charge losses, increasing sensitivity in reaction cell mode.
Explains the operating principle behind improved sulfur DLs in MS/MS mass-shift mode.
Source
“Axial acceleration gives these product ions more energy to enable them to overcome these effects and proceed along the axis of the ion-guide, increasing sensitivity.”
Operation
Axial acceleration also suppresses higher-order cluster ions because the added collisional energy exceeds their weak bond energy.
Guides method tuning to favor lower-order product ions and cleaner spectra.
Source
“the increased collisional energy exceeds the weak bond energy of potential high-order cluster ions”
Operation
Single nanoparticle signals last only a few milliseconds, so a fast detector with short dwell time is needed to avoid particle overlap.
Sets the detector and dwell-time requirement for spICP-MS method setup.
Source
“The signal generated from a single NP typically lasts for only a few milliseconds or less.”
Performance
MS/MS removes the 48Ca overlap on Ti at m/z 48 and the N2+/CO+ interferences on Si, enabling SiO2 and TiO2 nanoparticle measurement down to 50 nm or less.
Confirms feasibility of difficult-element nanoparticle analysis before purchase.
Source
“The 8900 ICP-QQQ uses MS/MS mode to remove these spectral interferences, allowing accurate measurement of Si and Ti at low levels.”