Microsoft .NET 4.6.2 or higher is required on the controller PC.
Prevents installation failure due to missing or outdated .NET runtime.
Source
“Microsoft .NET: 4.6.2 or higher”
Operation
Automatic reporting requires Adobe Acrobat DC Reader 19.012.0034 or later to view and generate reports.
Ensures report generation and viewing work on the selected PC.
Source
“requires Adobe Acrobat DC Reader version 19.012.0034 or later to be able to view and generate reports”
Installation
Administrative rights are mandatory to install all required software components.
Prevents failed installations caused by restricted user accounts.
Source
“You need to have an account with administrative rights to successfully install all required components.”
Installation
All running programs, including any Femto Pulse controller subprogram instances, must be closed before installation.
Avoids file locks and installation conflicts during setup.
Source
“Close all running programs, including all instances of any Femto Pulse controller software subprogram.”
Installation
The installation package includes FTDI and Starlight Xpress CCD device drivers that must be installed before the controller software.
Confirms that instrument communication and CCD drivers are prerequisites for controller operation.
Source
“Once the FTDI drivers have been successfully installed, you will see the following window indicating the device driver is installed and is ready to use.”
Installation
The PC must be restarted after installation to ensure successful software installation.
Prevents driver or service initialization issues on first instrument use.
Source
“Re-start the PC to ensure successful software installation.”
Maintenance
If upgrading fails, existing Femto Pulse controller installations should be removed before retrying.
Provides a defined recovery path for failed software upgrades.
Source
“If you encounter problems whilst upgrading the Femto Pulse controller software, please remove the existing Femto Pulse controller software installations.”
Operation
Timeshift correction is applied at the end of the separation rather than to the real-time electropherogram in revision 2.1.0.
Affects how and when corrected separation data becomes available to the operator.
Source
“Timeshift correction no longer applied to real time electropherogram but applied at the end of the separation”