Introduction to Agilent AA spectrometer product line and benefits
Config.p. 3
Comparison table to choose instrument for application
Overviewpp. 4-5
High-speed flame AA capabilities and performance
Overviewpp. 6-8
Sensitive furnace AA, automation, and sensitivity enhancement
Overviewp. 9
Software features to simplify analysis
Config.p. 10
Accessories for various analysis challenges
Servicesp. 11
Service and consumables offerings
Servicesp. 12
Agilent CrossLab support and insights
p. 3table, 3 rows
Which instrument will suit your application?
Environmental
Food and Agriculture
Chemical and Petrochemical
Materials and Mining
Pharmaceutical
FS Flame AA 240FS + SIPS, 280FS + SIPS
Determination of Mg, Ca, and K in brines (SIPS accessory provides automated calibration and online sample dilution)
Analysis of Cr in soils and solid wastes
Major elements Ca, Cu, Fe, Mg, Na and Zn in food, beverage, and agricultural samples
Cations and nutrients in soils
Na and K in FAME (fatty acid methyl esters)
Pb and Mn in unleaded gasoline
Ca, Cr, Cu, Fe, K, Mg, and Na in plating solutions
Au, Ag, and Pt group elements in ore grade material
Cu in traditional Chinese medicines
Vapor Generation AA 240FS/280FS AA + VGA 77
As, Hg, and Sb in coal fly ash
As, Sb, and Se in sediments
Hg in waters, effluent, etc. (US EPA method 245.1)
Hg and As in fish and sea foods
Trace As and Sb levels in plant materials
Hg in electronics and plastics (WEEE/RoHs)
As and Sb in zinc plating solutions
Hg and As in raw materials used in the production of pharma components
Zeeman GFAA 240Z AA, 280Z AA
Toxic elements in waters (GB/T5750, US EPA method 200.9,)
Toxic and Heavy metals Be, Pb and Cd in soils and sediments (HJ and GB/T Methods)
Cd, Cu, Pb, Co, and Ni in marine invertebrates
Pb in soy sauce following GB 2762
Pb and Cd in fish, sea foods, and plant
Determination of Cd, Cr, Ni and Pb in Grains
Cu, Fe, and Ni in edible oils
Ni, V, Fe, and Na in crude oils
Trace elements in heavy, industrial fuel oils
Trace elements in high purity sulfuric acid or
Na, Ca, and Si in pure process water
Al and Fe in paper
Pb and Cd in consumer goods, toys, jewelry
Pb, Cd, and Cr in electronics and plastics (WEEE/RoHs)
Trace metals in high purity copper
Analysis of Cd, and Pb impurities in pharmaceutical substances
Engineering Facts
14 facts · every claim linked to a page
Selection
The 240 FS is a four-lamp flame/vapor system with Fast Sequential mode, suited to budget-sensitive routine labs.
Determines whether this model covers the lab's routine multi-element flame workload within budget.
Source
“The Agilent 240 FS is designed for routine flame/vapor analyses for budget-sensitive labs.”
Selection
The 240Z uses transverse Zeeman GFAA correction and four lamps, targeting routine trace-level analyses.
Confirms suitability for trace-level furnace work where background correction quality is decisive.
Source
“The Agilent 240Z Zeeman Graphite Furnace AA (GFAA) with Transverse Zeeman background correction provides the most uniform and accurate correction for even your toughest samples.”
Selection
The Duo configuration pairs one flame and one furnace AA under a single computer to avoid changeover downtime.
Guides choice when the lab must handle both flame and furnace samples without swapping atomizers.
Source
“The Agilent Duo system features two instruments: one flame AA and one graphite furnace AA, controlled by one computer.”
Selection
The 280FS combines eight lamps with Fast Sequential mode for high-throughput flame labs.
Justifies the higher model when throughput and lamp capacity are the deciding criteria.
Source
“The Agilent 280FS is a high performance flame atomic absorption spectrometer. It combines eight lamps with Agilent’s patented Fast Sequential mode, doubling sample throughout and dramatically reducing running costs.”
Selection
The 280Z is specified for labs needing the lowest detection limits with eight lamps and transverse Zeeman correction.
Directs selection toward the 280Z when ppb-level detection limits are mandatory.
Source
“The Agilent 280Z GFAA features Transverse Zeeman background correction, a high specification optical system, and eight lamps. The instrument is designed for laboratories needing the lowest detection limits.”
Performance
Fast Sequential mode measures all elements from a single aspiration, cutting sample consumption and analysis time.
Explains the productivity and sample-consumption benefit that justifies FS over conventional AA.
Source
“Determine the concentration of all elements from a single aspiration of each sample”
Performance
PROMT combined with Fast Sequential mode reduces gas consumption and analysis time by over 60%.
Quantifies operating-cost savings relevant to running-cost calculations during selection.
Source
“When combined with Fast Sequential mode, gas consumption and analysis time reduced by over 60%”
Performance
Transverse Zeeman correction with three-point polynomial interpolation gives an 11-fold improvement in correction accuracy.
Supports method validation and selection for matrices with structured or high background absorbance.
Source
“Agilent Zeeman systems use three point polynomial interpolations to accurately track the background signal, resulting in an 11-fold improvement in correction accuracy.”
Conformité
Zeeman background correction is accepted by environmental agencies such as the US EPA for regulated analyses.
Confirms regulatory acceptability of the correction technique for environmental compliance work.
Source
“Environmental agencies (such as the US EPA) accept Zeeman background correction as the most effective background correction technique for regulated environmental analyses.”
Operation
The PSD120 autosampler holds up to 130 solutions and prepares calibration standards from a single bulk standard.
Informs bench space planning and calibration workflow design for furnace operation.
Source
“The PSD120 furnace autosampler (with capacity for up to 130 solutions), automatically prepares and delivers calibration standards from a single bulk standard.”
Operation
Tube-CAM video monitoring lets the operator inspect the graphite tube in real time to set drying, ashing, and dispensing height.
Affects method setup and troubleshooting practice during furnace installation and commissioning.
Source
“The Tube-CAM video monitoring lets you see inside the graphite tube, in real time.”
Performance
UltrAA lamps raise sensitivity by up to 40% and typically exceed 8000 mA hours of operation.
Influences lamp selection and consumable lifetime planning for demanding applications.
Source
“The sharper emission profile of the UltrAA lamp reduces self-absorption and line broadening, enhancing sensitivity by up to 40%”
Operation
SIPS performs over-range dilutions up to 200x with less than 2% error automatically.
Determines whether manual dilution steps can be eliminated and how much sample prep automation is needed.
Source
“performing over-range dilutions up to 200x with less than 2% error”
Performance
The Mark 7 atomization system, standard on 280 FS, achieves typically > 0.9 Abs from 5 mg/L Cu and < 0.5% RSD.
Provides acceptance criteria for flame performance verification at installation.
Source
“Achieve high sensitivity—typically > 0.9 Abs. from 5 mg/L Cu”