Induztr
Résumé technique Visionneuse de documents Modèles associés

At Site Rock and Mineral Measurement: Diffuse Reflectance Geolibrary

Sommaire

  1. Overview pp. 1-2
    Introduces at-site rock and mineral measurement and document purpose
  2. Overview p. 3
    Describes the diffuse reflectance spectral geolibrary for mineral identification
  3. p. 4
    Provides Agilent website and contact details

Engineering Facts

11 facts · every claim linked to a page
Selection

The handheld FTIR analyzers are battery operated and designed for demanding field environments, so they can be selected for at-site rock and mineral measurement rather than lab-only use.

Confirms the instrument class is field-portable and robust enough for site selection.

Source
“Agilent introduced the first handheld battery operated Fourier transform infrared (FTIR) analyzers that have both the performance envelope and robustness to be used effectively in demanding field environments.”
Operation

The diffuse reflectance interface enables direct measurement of samples without sample preparation, which is critical for field workflows on outcrops, ore bodies, drill core, or inside a mine.

Determines whether the analyzer can be used directly on unprepared field samples.

Source
“Agilent have developed a diffuse reflectance sampling interface for Agilent handheld FTIR systems, which enables direct measurement of samples without sample preparation.”
Selection

The on-board library is optimized for diffuse reflectance field FTIR, unlike commercial libraries measured in absorbance/transmittance on benchtop instruments, so library compatibility must be checked during selection.

Prevents selecting a library or method mismatch between field diffuse reflectance and lab transmittance spectra.

Source
“In contrast to commercially available libraries that are specific to absorbance/transmittance measurements on a benchtop FTIR, the library is optimized for a diffuse reflectance field FTIR analyzer.”
Performance

Specular reflection can alter the diffuse reflectance spectrum depending on particle size, crystallinity, and surface reflectivity, so the analyzer algorithm uses both rough and smooth surface spectra to improve matching.

Explains why surface condition affects identification quality and why both surface types are included.

Source
“Depending on the particle size and crystallinity of the specimen, as well as the reflectivity of the surface being analyzed, there can be a specular component to the diffuse reflectance spectrum, which tends to alter the overall spectrum.”
Performance

For certain minerals the library includes both rough-surface and smooth reflective crystal-surface spectra, and the analyzer algorithm accesses both to predict the best match.

Shows that hit quality depends on the library containing both surface morphologies.

Source
“Therefore, for certain minerals, spectra have been included in the library of both the rough surface and the smooth reflective crystal surfaces (Figure 2). The algorithm used by the analyzer accesses both types of spectra to predict the best match for a particular sample.”
Operation

Spectra in the example were recorded at 4 cm-1 resolution with 128 co-added scans taking approximately 1 minute to collect and process, which sets an expectation for field measurement time.

Gives a practical acquisition-time and resolution reference for field operation.

Source
“The spectra were recorded at 4 cm-1 resolution and consist of 128 scans co-added interferograms that take approximately 1 minute to collect and process”
Operation

The full spectrum of the specimen is stored and can be accessed for further investigation, supporting later review or re-analysis after field collection.

Confirms data retention capability needed for field records and later verification.

Source
“The full spectrum of the specimen in question is stored and can be accessed for further investigation.”
Selection

Users can create their own libraries specific to their requirements in addition to the on-board Agilent library, which matters when site-specific minerals are not covered.

Allows tailoring the library to site-specific mineralogy during selection and deployment.

Source
“In addition to the on-board Agilent library, the 4100 ExoScan and 4200 FlexScan FTIR analyzers enable users to easily create their own library specific to their requirements.”
Selection

The library covers igneous/plutonic, metamorphic, and sedimentary rocks and minerals with various chemical compositions, so coverage should be checked against the expected site geology.

Helps verify whether the on-board library matches the rock and mineral types at the site.

Source
“Igneous/plutonic, metamorphic and sedimentary rocks and minerals are included in the library possessing various chemical compositions including nitrates, sulfates, oxides, silicates, aluminosilicates, phosphates, sulfides, borates, vanadates, tungstates, urinates, and so on.”
Operation

The diffuse reflectance measurement collects diffusely scattered light from the sample and returns it to the IR detector, which is the basis for neat-sample field measurement.

Clarifies the optical measurement principle required for correct field use.

Source
“This form of reflectance measurements collects the diffusely scattered light from a sample and then returns the scattered light to the IR detector.”
Performance

If a mineral has covalently bonded atoms, there is frequently a well-defined IR spectrum, which supports using FTIR for mineral identification.

Sets expectation for which minerals are likely to give usable IR spectra.

Source
“If a mineral possesses a chemical structure in which the atoms are covalently bonded, there is frequently a well defined IR spectrum that is obtained.”