Induztr
Résumé technique Visionneuse de documents Modèles associés

HILIC Analysis of GLP-1 Receptor Agonists

Technical Reference Summary

Covered Models & Document Scope

Nota de aplicación que compara un Agilent 1290 Infinity III LC System (acero inoxidable, SST) y un 1290 Infinity III Bio LC System (BIO) para el análisis por HILIC de productos farmacéuticos agonistas del receptor de GLP-1 utilizando columnas Poroshell HILIC-Z y Altura Poroshell HILIC-Z con detección DAD y ELSD.

Technical Data

Parameter Value Condition
Column Agilent InfinityLab Poroshell HILIC-Z, 2.1 × 150 mm, 2.7 µm (p/n 683775-924) p.3 ↗ SST system
Flow rate 0.4 mL/min p.3 ↗
Mobile phase A 100 mM ammonium formate pH 3 p.3 ↗
Mobile phase B ACN p.3 ↗
Column temperature 40 °C p.3 ↗
Autosampler temperature 10 °C p.3 ↗
Injection volume 1 µL p.3 ↗
Needle wash 10 s 50/50 (v/v) acetonitrile:water p.3 ↗
DAD detection wavelength 280/4 nm, reference 360/100 nm, 2.5 Hz p.3 ↗
ELSD evaporator temperature 50 °C p.3 ↗
ELSD nebulizer temperature 50 °C p.3 ↗
ELSD gas flow rate 1.0 SLM p.3 ↗
ELSD data rate 80 Hz p.3 ↗
ELSD smoothing 30 p.3 ↗
ELSD PMT gain 1.0 p.3 ↗
Pump Agilent 1290 Infinity III High-Speed Pump (G7120A) p.3 ↗ SST system
Detection cell Agilent Max-Light Cartridge Cell, standard p.3 ↗ SST system
Data system Agilent OpenLab CDS, version 2.7 p.3 ↗

Operating Limits

  • Column temperature: 40 °C p.3 ↗
  • Autosampler temperature: 10 °C p.3 ↗
  • ELSD evaporator/nebulizer temperature: 50 °C p.3 ↗