DuoVane 36 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum DuoVane 36 and DuoVane 70 two-stage oil-lubricated rotary vane vacuum pumps. Variants/options mentioned: M-version (magnetic coupling), C-version (corrosive gas), MC-version (corrosive gas with magnetic coupling), plus accessories (service kit, oil mist/dust separators, sorption trap, cold trap, booster adapter flange, monitoring unit, oil filters, vacuum pump oil).
Section-by-Section Technical Breakdown
The DuoVane 36/70 are two-stage oil-lubricated rotary vane vacuum pumps positioned as user-friendly, compact and reliable for industrial applications. Both integrate a gas-ballast valve and a vacuum safety valve. Corrosive-gas and magnetic-coupling variants are available, along with a range of accessories and spare parts.
- Integrated gas-ballast valve and vacuum safety valve as standard
- C-version for corrosive gases; M-version with magnetic coupling; MC-version combining both
- Accessories: service kit, oil mist separator, dust separator, sorption trap, cold trap, vacuum booster adapter flange, operations monitoring unit, mechanical and chemical oil filters, vacuum pump oil
A data table compares DuoVane 36 and DuoVane 70 across pumping speed, ultimate pressure, motor data, noise, oil capacity, weight, dimensions and connections. Pumping speed curves (air at 20 °C, tolerance ±10%) are given for both 50 Hz and 60 Hz operation. A dimensional drawing is included.
- Nominal pumping speed: 32/36 m³/h (50/60 Hz) for DuoVane 36; 62/70 m³/h (50/60 Hz) for DuoVane 70
- Ultimate pressure 2·10⁻³ hPa (gas-ballast closed), 3·10⁻³ hPa (gas-ballast open) for both models
- Three-phase motor: 1.1/1.3 kW (36) and 1.5/1.8 kW (70) at 50/60 Hz; 1500/1800 min⁻¹
- Noise level 61 dB(A) at 50 Hz for both models
- Oil capacity 3.2 l (36) / 4.2 l (70); weight approx. 68 kg / 75 kg
- Dimensions 645x240x340 mm (36) / 728x240x340 mm (70)
- Gas inlet/outlet DN 40 ISO-KF on both models
- Pumping speed curves at air 20 °C, tolerance ±10%
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Ultimate pressure is 2·10⁻³ hPa(mbar) with gas-ballast valve closed and 3·10⁻³ hPa with it open, for both models. p.2 ↗ | Gas-ballast operation costs only half a decade in ultimate pressure; condensate handling can be enabled without large pressure penalty. | DuoVane 36 and 70 |
| Nominal pumping speed: 32/36 m³/h (50/60 Hz) for DuoVane 36 and 62/70 m³/h (50/60 Hz) for DuoVane 70; curve tolerance ±10% at 20 °C air. p.2 ↗ | Size the pump with a ±10% margin on stated curves; 60 Hz operation gives ~12% more speed. | Whole series |
| Three-phase motors rated 1.1/1.3 kW (DuoVane 36) and 1.5/1.8 kW (DuoVane 70) at 50/60 Hz. p.2 ↗ | Electrical supply and protection must be sized for 60 Hz power draw, which is ~0.2 kW higher than 50 Hz. | Whole series |
| Nominal motor speed is 1500 min⁻¹ (50 Hz) and 1800 min⁻¹ (60 Hz). p.2 ↗ | Pumps run directly at 4-pole synchronous-related speed; no frequency conversion needed for standard mains. | Whole series |
| Noise level 61 dB(A) at 50 Hz for both models. p.2 ↗ | Low enough that dedicated acoustic enclosures are generally unnecessary in typical industrial environments. | Whole series |
| Oil capacity is 3.2 l (DuoVane 36) and 4.2 l (DuoVane 70). p.2 ↗ | Stock appropriate oil volumes per model for oil changes; use specified Pfeiffer vacuum pump oil. | DuoVane 36 / DuoVane 70 respectively |
| Weights are approx. 68 kg (36) and 75 kg (70). p.2 ↗ | Two-person handling or lifting equipment required for installation. | Whole series |
| Dimensions: 645x240x340 mm (DuoVane 36) and 728x240x340 mm (DuoVane 70), L x W x H. p.2 ↗ | The 70 is 83 mm longer; footprint planning must account for this narrow, long envelope. | DuoVane 36 / DuoVane 70 respectively |
| Gas inlet and outlet are DN 40 ISO-KF on both models. p.2 ↗ | Standardized KF clamping connections simplify piping; identical flanges ease swap between 36 and 70 models. | Whole series |
| Vacuum safety valve is integrated as standard. p.1 ↗ | Protects against backstreaming/overpressure on pump stop without an external valve. | Whole series |
| C-version is available for corrosive gas applications; MC-version combines corrosive-gas capability with magnetic coupling. p.1 ↗ | Select C/MC variants for aggressive media instead of adding external gas-purging measures. | Variant selection |
| Sorption trap and cold trap accessories are offered. p.1 ↗ | Use to protect the pump from vapors/condensables upstream in process applications. | Whole series |
| M-version with magnetic coupling exists (contact-free shaft seal). p.1 ↗ | Reduces leak-tightness concerns at the shaft; choose where hermetic sealing is required. | M/MC variants |
| Vacuum booster adapter flange is an available accessory. p.1 ↗ | Roots booster can be combined for higher pumping speed at low pressures without changing base pump. | Whole series |