IPE2 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum IPE2 leak detector for demanding industrial leak testing (high-pressure valves and fittings). Document covers the base IPE2 unit plus options/spare parts: LeakTek software, Adaptive Test™, Leak Rx, expansion tanks (small/medium/large), precision pressure regulators, verification orifices (ECD/SE/ECS), remote exhaust valve, oil-free (0.07–0.15 or 0.3–0.8 bar abs.) and rough vacuum generation packages, remote pendant, mass extraction UUT filter, quick connectors.
Section-by-Section Technical Breakdown
The IPE2 is positioned as a robust leak detector for demanding applications such as high-pressure valves and fittings, with long life cycle. It offers short cycle times for high throughput and flexible test configurations. It supports large parts and dual-channel operation combining vacuum and pressure testing.
- Robust design for demanding applications, high-pressure valves and fittings, long life cycle
- High performance: short cycle times, high throughput
- Flexible: suitable for large-size parts
- Dual channel combining vacuum and pressure testing
- Digital and analog I/O interface
A list of available accessories and options for the IPE2, covering software tools, vacuum generation packages, calibration orifices, and pneumatic/mechanical accessories. These items allow tailoring the tester to specific test volumes, supply quality, and integration needs.
- LeakTek software; Adaptive Test™ utility tool; Leak Rx
- Expansion tank small/medium/large
- Precision pressure regulator small/medium volume
- Verification orifice ECD, SE (ECD-X-PSE·X-P), ECS air calibration
- Glass orifice calibrated at barometric inlet, vacuum outlet on primary standard
- Remote exhaust valve with filter
- Oil-free vacuum generation and control package (0.07–0.15 or 0.3–0.8 bar abs.)
- Rough vacuum generation and control package
- Remote pendant with on/off button
- Mass extraction UUT filter; quick connector with plug
Key performance, supply, environmental and physical specifications of the IPE2, including sensitivity, pressure range, utilities requirements, interfaces, and dimensions/weight. Sensitivity is 1·10⁻⁴ sccs with pressure testing up to 500 psia.
- Sensitivity: 1·10⁻⁴ sccs
- CDA supply: air (pilot operated valves), quality 1.3.1 per ISO 8573-1
- CDA pressure: 65–145 psig / 4.5–10 bar rel.; typical consumption 2 Nl/cycle
- Pressure range: up to 500 psia
- Power supply: 110/120 / 220/240 V AC (50/60 Hz); typical consumption 1200 W
- Operating temperature 15–45 °C (59–83 °F); humidity 30–80 %
- User interface: RJ45 Ethernet or RS232; software LeakTek (local or LDAP domain authentication); Windows 10 OS
- Network: 1x LAN (RJ45); interfaces: USB, wired Ethernet
- Weight approx. 127 kg (280 lbs); dimensions 686 x 610 x 483 mm (27 x 24 x 19 in)
Defines the pneumatic connection types and the electrical I/O characteristics for machine integration. Digital I/O are opto-isolated with different voltage classes for inputs/outputs; analog output provides 0–5 V DC pressure control on a single channel.
- Pneumatic connections: 1/4" to 1/2" Swagelok (application dependent)
- Digital inputs: 5 V DC, opto-isolated — start, stop, type, pressure switch, verify
- Digital outputs: 30 V DC, 20 mA, opto-isolated — pass, fail, clamp, test type, exhaust, custom
- Analog outputs: single channel, 0–5 V DC pressure control
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Applies To |
|---|---|---|
| Leak rate sensitivity is 1·10⁻⁴ sccs. p.2 ↗ | Suitable for production leak testing of high-pressure valves/fittings; not a fine vacuum helium-detector-class sensitivity — verify against part acceptance criteria before selection. | IPE2 |
| Test pressure range up to 500 psia. p.2 ↗ | Enables high-pressure testing without external boosters; confirm UUT test pressure stays within this limit. | IPE2 |
| Requires clean dry air (CDA) per ISO 8573-1 quality class 1.3.1 at 4.5–10 bar rel. (65–145 psig). p.2 ↗ | Plant air must meet class 1.3.1 (very dry/filtration level); an air treatment package may be needed if shop air quality is lower. | IPE2 |
| Typical CDA consumption is 2 Nl per cycle. p.2 ↗ | Allows sizing of air supply capacity for high-throughput multi-cycle operation. | IPE2 |
| Power supply 110/120 or 220/240 V AC, 50/60 Hz, typical consumption 1200 W. p.2 ↗ | Electrical hookup must provide ~1.2 kW per unit; check breaker/circuit sizing accordingly. | IPE2 |
| Operating conditions: 15–45 °C (59–83 °F), humidity 30–80 %. p.2 ↗ | Install within an environmentally controlled area; avoid condensation and temperatures above 45 °C. | IPE2 |
| Runs Windows 10 with LeakTek software supporting local or LDAP domain authentication. p.2 ↗ | Can be integrated into plant IT/user management; plan Windows 10 lifecycle and network security accordingly. | IPE2 |
| User interface via RJ45 Ethernet or RS232; additionally 1x LAN (RJ45) and USB. p.2 ↗ | Factory automation/SCADA integration possible via wired Ethernet; RS232 available for legacy systems. | IPE2 |
| Weight approx. 127 kg (280 lbs); dimensions 686 x 610 x 483 mm (L x W x H). p.2 ↗ | Plan lifting/handling equipment and bench/cabinet space; not a one-person move. | IPE2 |
| Pneumatic connections are 1/4" to 1/2" Swagelok, application dependent. p.3 ↗ | Specify Swagelok fittings/tubing matched to the chosen configuration when planning installation plumbing. | IPE2 (configuration dependent) |
| Digital inputs are 5 V DC opto-isolated (start, stop, type, pressure switch, verify). p.3 ↗ | PLC inputs must drive at 5 V DC logic; use appropriate interposing modules for 24 V PLC systems. | IPE2 |
| Digital outputs are 30 V DC, 20 mA, opto-isolated (pass, fail, clamp, test type, exhaust, custom). p.3 ↗ | Output signal capacity is limited to 20 mA — use relays for driving loads like stack lights or contactors. | IPE2 |
| Analog output is a single channel, 0–5 V DC for pressure control. p.3 ↗ | Pressure monitoring via analog requires a 0–5 V DC input; only one analog channel available per unit. | IPE2 |
| Supports dual-channel operation combining vacuum and pressure testing on one unit. p.1 ↗ | Mixed leak-test strategies (e.g., vacuum decay and pressure decay) can be consolidated in a single station, saving hardware. | IPE2 |
| Optional oil-free vacuum generation and control package available in two ranges: 0.07–0.15 or 0.3–0.8 bar abs., plus a rough vacuum package. p.1 ↗ | Select the vacuum package matching the required test vacuum level; oil-free generation avoids contamination of UUT. | IPE2 options |
| Expansion tanks (small/medium/large) and small/medium-volume precision pressure regulators are offered as options. p.1 ↗ | Test volume and pressure regulation must be matched to part size at ordering time to achieve stable decay measurements. | IPE2 options |
| Calibration/verification hardware includes ECD, SE (ECD-X-PSE·X-P) and ECS air calibration orifices, and glass orifices calibrated at barometric inlet/vacuum outlet against a primary standard. p.1 ↗ | Plan periodic verification with these orifices for audit/traceability of test integrity. | IPE2 options |