Agilent Technologies Compact microplate stacking, serial dilution, plate stamping
Agilent Technologies Compact microplate stacking, serial dilution, plate stamping — Automated liquid handling.
The Agilent Bravo BenchCel Workstation is an integrated automated liquid handling platform combining a Bravo pipetting head (300 nL to 200 µL) with a BenchCel 2R microplate handler and 660 mm front loading racks, driven by VWorks Automation Control Software. It is configured for serial dilution, plate stamping and microplate stacking/sealing workflows on 96-well bottom plates. Average pipetting precision is 2.7 %.
Full specifications
| Average Precision | 2.7 % |
| Pipetting volume range mfr | 300 μL |
| Microplate handler front loading rack size mfr | 660 mm |
| Mix volume per mix cycle mfr | 150 μL |
| Mix amplitude mfr | 6 mm |
| Number of mix cycles mfr | three three |
| Processing time mfr | 568 sec/plate |
| Accuracy ratio mfr | 1 |
| Microplate handler model mfr | 2 R |
| Microplate sealer model mfr | PlateLoc Thermal Microplate Sealer Sealer |
| Microplate type mfr | 96 bottom |
| Control software mfr | VWorks Automation Control Software Software |
| Front loading rack height mfr | 660 mm |
| Number of standard deck positions mfr | nine nine |
| Tartrazine standard concentration mfr | 0.36 mM |
Description
Construction and positioning
- This modification is the Bravo BenchCel Workstation: a Bravo liquid handler with a 300 nL to 200 µL pipetting head, a BenchCel 2R microplate handler with 660 mm front loading racks, and nine standard deck positions.
- It differs from the sibling compact/flexible liquid handler (pipetting only) and the sibling microplate handler (stacking and sealing only) by integrating both pipetting and plate handling in one VWorks-controlled workstation.
- The PlateLoc Thermal Microplate Sealer is documented as an adjacent module in the 2R handler workflow (5991 8091EN), not as a built-in component of this workstation.
Behavior under load and in different modes
- Serial dilution performance is characterized at 2.7 % average precision; the application note uses a 0.36 mM tartrazine standard as the dye tracer.
- Mixing is specified as three mix cycles of 150 µL at 6 mm amplitude.
- Documented processing time is 568 sec/plate for the serial dilution workflow.
- The pipetting head spans 300 nL to 200 µL; the 300 µL figure in the extra specs is the upper volume range label, not a separate rating.
Installation, connection and control
- Control is centralized in VWorks Automation Control Software, which sequences the Bravo pipetting head and the BenchCel 2R handler.
- The 2R handler uses 660 mm front loading racks for plate input/output; the rack height is also given as 660 mm.
- The workstation is documented for 96-well bottom microplates.
- No electrical, pneumatic or environmental specifications are provided in the verified facts; these must be obtained from the site preparation guide before installation.
Integration & Operating Notes
The Bravo pipetting head and the BenchCel 2R handler are separate devices coordinated by VWorks Automation Control Software. The plate handler must not present or remove a plate while the pipetting head is over the deck; the VWorks protocol must define handshake steps and safe park positions before any plate transfer.
The Bravo pipetting head is documented for 300 nL to 200 µL. Protocols calling for volumes outside this band require a different head or a dilution step; the 2.7 % average precision figure applies to the validated serial dilution workflow, not to arbitrary volumes.
The BenchCel 2R handler uses 660 mm front loading racks. The bench or enclosure must provide unobstructed front access of at least this depth so plates can be loaded and unloaded without disturbing the deck; bench depth and door swing must be checked before siting.
The PlateLoc Thermal Microplate Sealer and the Microplate Barcode Labeler are documented as adjacent modules integrated with the 2R handler, not as part of the base workstation. Sealing requires a peelable aluminum thermal seal roll, which is a consumable ordered separately; plan roll replacement and sealer maintenance as separate service items.
Selection & Integration Q&A
Choose this workstation when a protocol needs both pipetting (300 nL to 200 µL) and automated plate stacking in one VWorks run, e.g. serial dilution at 568 sec/plate. Pick the compact liquid handler if only pipetting is needed, or the microplate handler if only stacking/sealing is required.
The 2R handler workflow integrates the PlateLoc Thermal Microplate Sealer or the Microplate Barcode Labeler under VWorks control. The sealer uses a peelable aluminum thermal seal roll, a consumable not in base delivery; confirm sealer and labeler are quoted as separate line items.
The PlateLoc Thermal Microplate Sealer, the Microplate Barcode Labeler and the peelable aluminum thermal seal roll are separate from the base workstation. VWorks Automation Control Software is the control layer; confirm software licenses and any integration cabling are quoted separately.