No photo available yet
Agilent Technologies Rotary Motion Feedthroughs for UHV
Agilent Technologies Rotary Motion Feedthroughs for UHV — Vacuum technologies.
Rotary motion feedthrough for UHV service, part of Agilent's Feedthroughs series. The supplied fact set contains no mechanical, electrical, or vacuum-rating data for this model, so no torque, speed, flange, or leak-rate figures can be stated. It is intended to transmit rotary actuation through a vacuum chamber wall; sizing must be confirmed against the actual product datasheet.
Full specifications
| Electron Charge | 1.602 coulomb |
| Molar Volume | 22.41 liters |
| Acceleration due to gravity mfr | 9.8066 |
| Angstrom unit mfr | 10 m |
| Avogadro's number mfr | 6.02214076 |
| Boltzmann's constant mfr | 1.38064852 |
| Equivalent of heat mfr | 4.185 |
| Natural log base mfr | 2.7183 |
| Velocity of light mfr | 2.9979 |
| Velocity of sound mfr | 343 |
| Magnetic flux density mfr | 1 |
| Pressure conversion mfr | 1 Torr |
| Pumping speed conversion mfr | 1 L/s |
| Throughput conversion mfr | 1 cc/sec |
| Outgassing rate mfr | 2 |
| Atomic Mass Unit | 1.6605 grams |
| Standard pressure mfr | 101325 Pa |
Description
Construction and positioning
- The model is a rotary motion feedthrough for ultra-high-vacuum (UHV) chambers, listed under Agilent's Feedthroughs series.
- No sibling variants are recorded in the supplied data, so no comparison of shaft type, flange standard, or drive configuration can be made.
- The attached Agilent documents are a portfolio leaflet and a formulas/tables reference; neither contains feedthrough specifications, ordering codes, or dimensional data.
Behavior and ratings
- No curve points, torque ratings, rotational-speed limits, bakeout temperatures, or leak-rate values are present in the verified facts.
- The matched spec rows (atomic mass unit, electron charge, molar volume, Planck constant) and the extra rows (gravity, pressure and pumping-speed conversions, outgassing rate) are physical constants and conversion factors from the reference booklet, not properties of this feedthrough. They are therefore not reported as machine specifications.
Installation and operation
- The document digests contain no installation, connection, control, or maintenance instructions for this model.
- Flange size, shaft coupling, mounting orientation, and lubrication requirements must be taken from the product-specific manual, which is not among the supplied documents.
Integration & Operating Notes
The verified fact set contains no torque, rotational-speed, bakeout-temperature, or leak-rate values for this feedthrough. Selecting a drive motor or specifying operating limits without the product datasheet risks overloading the shaft seal or exceeding the vacuum rating.
The supplied Agilent documents are a portfolio leaflet and a formulas/tables booklet; neither lists flange standard, shaft diameter, or mounting orientation for this model. Confirm the chamber port and coupling dimensions against the product-specific drawing before ordering.
No lubrication schedule, seal replacement interval, or spare-parts list for this feedthrough appears in the attached documents. Obtain the model manual for maintenance intervals and consumable part numbers before commissioning.
Selection & Integration Q&A
The supplied facts list no sibling models and no variant data (shaft type, flange, drive), so a comparison cannot be made from this record. Select against the full Agilent feedthrough catalog and the chamber port standard; this card cannot distinguish it from neighbors.
Flange standard, shaft diameter, and coupling type are not stated in the supplied documents. Confirm them on the product drawing, then match the external drive's torque and speed to the feedthrough rating from the datasheet, since neither value is in this fact set.
No. The attached documents are a portfolio leaflet and a formulas/tables booklet; neither gives mounting orientation, bakeout temperature, or duty-cycle limits for this feedthrough. These must come from the model manual before installation.
The supplied documents contain no maintenance interval, lubrication specification, or accessory list for this feedthrough. Cables, drive couplings, and spare seals cannot be confirmed as included or excluded; check the model manual and order code.