Avantik EM8C
Avantik EM8C — Embedding centers.
The Avantik EM8C Cryo Console is the cooling module of the EM8 Embedding Center, providing a 12 x 14.75 inch working area at 0 to -15 °C for rapid paraffin solidification. As a dedicated cold plate, it is intended to pair with the EM8H Dispensing Console in a two-module embedding workflow. Its 55 lb benchtop construction (13 x 16 x 23.75 in) integrates into histology sample preparation lines.
Full specifications
| Working area | 12 x 14.75 inch |
| Working temperature | 0 to -15 °C |
| Depth | 16 inch |
| Height | 23.75 inch |
| Weight | 55 lbs |
| Width | 13 inch |
Description
Construction and positioning
- The EM8C is a standalone cryo console, one of two modules in the Avantik EM8 Embedding Center; the other is the EM8H Dispensing Console. - It provides a flat working surface of 12 x 14.75 inches maintained between 0 and -15 °C. - Physical envelope: 13 in wide, 16 in deep, 23.75 in high, 55 lbs; designed for benchtop placement. ### Behavior under load and media
- The cold plate operates as a passive thermal sink for paraffin blocks; no curve data or load-dependent performance is documented. - The working area accommodates multiple cassettes simultaneously; exact capacity is not stated. ### Installation, connection and operation
- The document digest lists no electrical, control, or plumbing interfaces; only the accessory electric heated forceps (EQ6109, EQ6110, EQ6111) are referenced. - Operation is limited to placing filled molds on the cold surface; no control panel or I/O is described.
Integration & Operating Notes
Condensation and frost will accumulate on the 0 to -15 °C plate; schedule regular defrosting and wipe-down to maintain thermal contact and prevent ice buildup that reduces effective working area.
Selection & Integration Q&A
Choose the EM8C when you need only a cold plate for rapid paraffin solidification; it lacks dispensing functions. The EM8H provides heated paraffin dispensing. For a complete embedding workflow, both modules are required.
Electric heated forceps models EQ6109, EQ6110, and EQ6111 are listed as accessories; they are not part of the base EM8C delivery and must be ordered separately. No other cables or consumables are specified.
No. The EM8C has no control interface, I/O signals, or communication ports documented; it is a manually loaded cold surface and cannot be directly controlled by an external system without additional hardware.