Avantik LP16
Avantik LP16 — Slide printers.
The Avantik LP16 is a UV laser slide labeling system that prints at 2500 dpi with a throughput of 4 seconds or less per slide. It is a standalone slide printer within Avantik's labeling portfolio, distinct from cassette-oriented laser models and thermal transfer units. It is intended for on-demand, high-resolution labeling of microscope slides in laboratory workflows.
Full specifications
| Print resolution | 2500 dpi |
| Print technology | UV laser |
| Throughput | 4 seconds or less |
| Weight | 15 lbs |
Description
Construction and positioning
- The LP16 is a UV laser slide printer, using laser ablation/marking rather than thermal transfer or inkjet technology. - It belongs to Avantik's slide labeling line; the brochure lists it alongside the ESPO II thermal transfer slide printer and the S100/S200 UV laser slide printers, while the C300/C301 and LifeTrack models target cassettes. ### Performance behavior
- Print resolution is 2500 dpi, suitable for small text and barcodes on standard slides. - Throughput is specified as 4 seconds or less per slide, enabling batch labeling without a separate curing or drying step typical of ink-based systems. - No curve points or load-dependent behavior data are provided; performance is stated as a fixed throughput figure. ### Installation and operation
- The unit weighs 15 lbs (6.8 kg), making it benchtop-mountable without special structural reinforcement. - The attached brochure digest contains no actionable engineering facts on electrical supply, interfaces, control software, or maintenance; these must be obtained from the full manual before integration.
Selection & Integration Q&A
Choose the LP16 for UV laser labeling at 2500 dpi and ≤4 s per slide. The ESPO II is thermal transfer (consumables required); the S100/S200 are also UV laser slide printers but differ in configuration—compare their throughput and resolution before selecting.
The available brochure digest provides no interface or software details for the LP16. The full instruction manual must be obtained to confirm connection type (e.g., USB, Ethernet) and compatible labeling software before system integration.
No environmental or duty-cycle specifications are included in the available digest. The unit weighs 15 lbs and is benchtop-oriented; consult the full manual for temperature, humidity, and continuous-operation limits before deployment.
The brochure digest lists no maintenance intervals, consumables, or included accessories for the LP16. Because it is a UV laser marker, it likely needs no ink or ribbon, but confirm laser service intervals and any slide-handling accessories in the full manual.