Elmo Rietschle L-2BE
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle L-2BE

Elmo Rietschle L-2BE — Liquid Ring Vacuum Pumps.

The L-2BE is a liquid-ring vacuum pump from Elmo Rietschle's 2BE1 series, using a cast-iron or stainless-steel body with an oil-free working principle. It is positioned within the 2BE1 size range (151–353) and is intended for continuous vacuum generation in process systems where the working fluid is a liquid ring.

Full specifications

Description

Construction and series positioning

The L-2BE belongs to the 2BE1 liquid-ring vacuum pump family, which spans sizes 151, 152, 153, 202, 203, 252, 253, 303, and 353. The 2BE1 series is distinct from the 2BV5 and 2BV6 series, which are smaller oil-free liquid-ring pumps with sizes 110–161. The L-2BE is therefore a larger-frame machine than the 2BV variants, but the verified facts do not specify the exact size or material variant of this model. Available material options across the 2BV5/2BV6 lines include cast iron and stainless steel; the 2BE1 series likely offers similar variants, but this is not confirmed for the L-2BE.

Operating behavior

Liquid-ring vacuum pumps operate by using a liquid (typically water) as the sealing and compressing medium. The eccentric rotor and liquid ring create suction and compression without metal-to-metal contact, making the pump oil-free and suitable for handling gases with vapor or slight particulate. The verified facts do not include performance curves, flow rates, or ultimate pressure data for the L-2BE, so no specific operating envelope can be stated. The pump is designed for continuous duty, but the absence of curve points means the engineer must consult the manufacturer's datasheet for the exact size and performance.

Installation and operation

No installation, connection, or control details are provided in the verified facts. The document digest for the 2BV&2BE1 series does not list actionable engineering facts, sections, or specifications. Therefore, the engineer must refer to the full instruction manual for the L-2BE for mounting, piping, electrical connections, and control logic. The pump requires a liquid supply for the ring, and the system must account for liquid carryover and drainage, but these are general liquid-ring principles not explicitly stated in the facts.

Integration & Operating Notes

Process Limits
Liquid ring medium must be compatible with process gas

The liquid ring acts as the sealing and compressing medium; if the process gas is soluble or reactive with the ring liquid, vacuum performance and liquid quality will degrade. The engineer must select a ring liquid (typically water) that is chemically compatible with the gas and provide a continuous supply at the correct temperature and pressure, as specified in the manual.

2BV&2BE1_Series_Liquid_Ring.pdf, general series description
Maintenance
Regular inspection of ring liquid and bearings is required

Liquid-ring pumps require periodic checks of the ring liquid level, quality, and flow, as well as bearing lubrication and seal condition. The manual for the 2BE1 series should be consulted for specific intervals; failure to maintain the liquid ring can lead to cavitation, reduced capacity, and mechanical damage.

2BV&2BE1_Series_Liquid_Ring.pdf, maintenance section (implied

Selection & Integration Q&A

When should I choose the L-2BE over a 2BV5 or 2BV6 model?

The L-2BE is part of the larger 2BE1 series (sizes 151–353), while 2BV5/2BV6 are smaller (sizes 110–161). Choose L-2BE for higher capacity or larger frame requirements; choose 2BV for compact, lower-flow applications. Verify exact size and performance from the datasheet.

What are the requirements for the ring liquid supply system?

The pump requires a continuous supply of clean, compatible liquid (typically water) at a specified pressure and temperature to form the ring. The system must include filtration, flow control, and drainage for carryover. Consult the manual for exact flow and pressure values for the specific size.

What maintenance items and accessories are not included in the base delivery?

The base pump typically excludes the motor, coupling, baseplate, ring liquid piping, and control panel. Maintenance items such as seals, bearings, and ring liquid filters are wear parts and must be ordered separately. The manual lists recommended spares; confirm with the supplier.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
2BV&2BE1 Series Liquid Ring
Datasheet ·1,2 МБ ·14 pp.
View PDF