Eppendorf BioBLU ® f HNQ Single-Use Bioreactors
Eppendorf BioBLU ® f HNQ Single-Use Bioreactors — Bioreactors & fermenters.
The BioBLU f HNQ is the microbial (f) variant of Eppendorf's HNQ single-use stirred-tank bioreactor line, offered at working volumes from 65 mL to 3.75 L. It is distinguished from the cell-culture (c) sibling, which spans 100 mL to 40 L, by its microbial duty range. It is intended as a disposable cultivation vessel driven by a BioFlo 320 controller within a bioprocess train.
Full specifications
Description
Construction and series positioning
- Single-use (disposable) stirred-tank bioreactor of the BioBLU HNQ family; the "f" designation marks the microbial configuration, with a stated working-volume span of 65 mL to 3.75 L.
- The same HNQ platform is also built as the "c" cell-culture variant covering 100 mL to 40 L; the f model is the smaller-volume, microbial-duty member of the pair.
- No vessel geometry, material, impeller, or sensor complement is stated in the verified facts, so construction details beyond the single-use format and volume class are not asserted here.
Behavior and operating envelope
- The only quantified operating range available is the working volume (65 mL – 3.75 L). No curve points, kLa, mixing-time, or temperature/pH/DO control data were supplied, so no performance behavior is described.
- Because the facts contain no matched performance, electrical, or media specifications, this card deliberately omits ratings, feed rates, and control ranges rather than infer them.
Control and integration context
- The brochure presents the HNQ reactors together with the BioFlo 320 bioprocess controller and DASware control plus software; these are the referenced control environment, not accessories confirmed as included with the vessel.
- No connection sizes, sensor types, or tubing specifications are given in the verified facts; integration details must be taken from the vessel's own documentation.
Integration & Operating Notes
The brochure positions the HNQ reactors alongside the BioFlo 320 controller and DASware control plus software. These are presented as the surrounding control environment; the verified facts do not confirm that a controller, software licence, or cabling is part of the vessel delivery, so specify them as separate line items.
The f configuration is the microbial member of the HNQ pair and tops out at 3.75 L working volume. If the process needs cell-culture conditions or volumes up to 40 L, the c variant is the matching choice; using the f vessel outside its microbial scope is not supported by the verified data.
Selection & Integration Q&A
Pick the f model for microbial cultivations at working volumes from 65 mL to 3.75 L. Choose the c variant when the process is cell culture or needs volumes up to 40 L; the two share the HNQ platform but differ in duty and volume span.
The brochure presents the HNQ reactors together with the BioFlo 320 bioprocess controller and DASware control plus software. Treat controller, software, and any cabling as separate items, since the verified facts do not list them as included with the vessel.
The verified facts list only the single-use bioreactor itself; controller, DASware software, sensors, tubing, and cables are not confirmed as included. No maintenance intervals or consumable schedules are stated, so obtain them from the vessel documentation.