Eppendorf BioFlo ® 120 Bioreactors
Eppendorf BioFlo ® 120 Bioreactors — Bioreactors & fermenters.
The BioFlo 120 is a benchtop bioreactor controller that accepts autoclavable glass/316L vessels (0.4–1.0 L working volume in the 1.3 L total vessel) and BioBLU single-use vessels. It supports microbial, mammalian, insect and stem-cell culture with Rushton, pitched-blade, marine-blade or spin-filter impellers. It is not a validated system and is not intended for plant/algae processes.
Full specifications
| Application | Microbiology |
| Bacteria/yeast/fungi | yes |
| Impellers | Rushton, pitched-blade, marine blade, or spin filter |
| Insect | yes |
| Interchangeable Vessels | no |
| Mammalian/animal | yes |
| Stem Cells | yes |
| Validatable | no |
| Plant/Algae mfr | no |
| Working volume (total) mfr | 0.4 – 1.0 L (1.3 L) |
| Material vessel 1) mfr | Borosilicate glass, 316 L stainless steel |
| Standard set-up mfr | BioFlo 120/320 |
Description
Construction and positioning
- Controller platform for benchtop bioreactor work; the standard set-up is listed as BioFlo 120/320, and the controller is compatible with autoclavable vessels of 1 L, 2 L, 5 L and 10 L as well as BioBLU single-use vessels (1c/f, 3c/f, 5c, 5p, 10c, 14c, 50c).
- The vessel described in the matched facts is borosilicate glass with 316 L stainless steel wetted parts, 1.3 L total volume and 0.4–1.0 L working volume.
- Vessels are not interchangeable within this configuration; the controller is not a validated system.
Process behaviour
- The platform is specified for bacteria, yeast and fungi, mammalian/animal cells, insect cells and stem cells; plant/algae is explicitly not supported.
- Impeller choice covers Rushton, pitched-blade, marine blade and spin filter, allowing the same controller to serve microbial (higher shear) and cell-culture (lower shear) duty.
- No digitized performance curves were supplied, so oxygen-transfer, mixing-time and temperature-control behaviour cannot be stated here.
Installation and operation
- The attached brochure digest contains no actionable installation, connection or control facts; mounting, electrical supply, I/O and service specifics must be taken from the full instruction manual before commissioning.
Integration & Operating Notes
The matched vessel is 1.3 L total with 0.4–1.0 L working volume; runs must be planned inside that band, and the controller is not a validated system, so regulated work needs separate qualification.
The specification lists bacteria, yeast, fungi, mammalian, insect and stem cells as supported, with plant/algae marked 'no'; do not schedule photosynthetic or algal processes on this configuration.
The supplied brochure digest contains no maintenance schedule, error codes or spare-parts list; calibration and service intervals for pH, DO and temperature loops must be taken from the instruction manual.
Selection & Integration Q&A
Pick it for small-volume process development in the 0.4–1.0 L working range with reusable glass/316L hardware. Move to the 2, 5 or 10 L autoclavable vessels or BioBLU single-use vessels when you need larger batches or eliminate cleaning.
Confirm the vessel is the 1.3 L borosilicate/316L unit and select the impeller (Rushton, pitched-blade, marine blade or spin filter) for the cell type. Vessels are not interchangeable, so the controller must be ordered for this vessel configuration.
The brochure digest gives no ambient temperature, humidity or duty-cycle figures. Treat the unit as benchtop laboratory equipment and obtain the full instruction manual for environmental and continuous-operation limits before installation.
The digest lists no cables, probes, impellers or spare vessels as included; impeller type is a selectable item and the vessel is a separate matched component. Confirm the delivery scope with the factory before specifying accessories.