Eppendorf Centrifuge 5427 R - For high-throughput
Eppendorf Centrifuge 5427 R - For high-throughput — Centrifuges.
The Centrifuge 5427 R is a refrigerated microcentrifuge with a 495 W motor, reaching 25,001 × g with fixed-angle rotors and 16,049 × g with swing-bucket rotors. Its temperature range of −11 to 40 °C and 48 × 1.5/2.0 mL capacity distinguish it within the Eppendorf microcentrifuge line. It is used for high-throughput pelleting of nucleic acids and proteins in molecular biology workflows.
Full specifications
| Act Label | yes |
| Max. Rcf | 25001 g |
| Max. Rcf With Fixed-angle Rotor | 25001 g |
| Max. Rcf With Swing-bucket Rotor | 16049 g |
| Remote Device Monitoring And Notifications (visionize ® ) | VisioNize ® box enabled |
| Rotational speed | 100...16220 rpm |
| Soft Brake Function | yes |
| Temperature range | -11...40 °C |
| Rotors available mfr | 9 |
| Max. capacity mfr | 48 × 1.5/2.0 mL |
| Timer mfr | 5 s to 9:59 h |
| Dimensions (W × D × H) mfr | 31,9 × 54,0 × 25,4 cm / 12,6 × 21,3 × 10 in |
| Height (with Open Lid) | 56 cm |
| Product Weight | 30 kg |
| Max. Power Consumption | 495 W |
| Power supply mfr | 230 V, 50 – 60 Hz |
| Cooling | refrigerated |
| Noise level | 56 dB |
Description
Construction and positioning
- The 5427 R is a refrigerated benchtop microcentrifuge with a 31.9 × 54.0 × 25.4 cm footprint (56 cm height with open lid) and 30 kg weight.
- It accepts 9 rotor types, with a maximum capacity of 48 × 1.5/2.0 mL tubes.
- Within the Eppendorf microcentrifuge range, it is the high-capacity refrigerated model; non-refrigerated siblings (5420, 5425) lack active cooling, while the 5427 R provides temperature control from −11 to 40 °C.
Performance and load behavior
- Rotational speed spans 100–16,220 rpm, yielding up to 25,001 × g with fixed-angle rotors and 16,049 × g with swing-bucket rotors.
- The soft-brake function is available for delicate separations.
- The timer covers 5 s to 9:59 h, allowing short spins and extended runs.
- Noise level is 56 dB during operation.
Control and monitoring
- The unit is VisioNize box enabled for remote device monitoring and notifications.
- Electrical supply is 230 V; motor power is 495 W.
- No further control interface details are provided in the available documentation.
Integration & Operating Notes
The centrifuge is specified for 230 V operation and a 495 W motor. Ensure the branch circuit can supply the starting current and that the outlet is properly grounded. Do not connect to a voltage other than the nameplate rating.
The unit weighs 30 kg and requires 56 cm height clearance when the lid is open. Install on a rigid bench free from vibration to avoid imbalance alarms and ensure proper refrigeration airflow around the housing.
Maximum RCF is 25,001 × g for fixed-angle rotors and 16,049 × g for swing-bucket rotors. Exceeding these limits, or using rotors not rated for the set speed, risks rotor failure and sample loss. Always verify the rotor’s maximum rating before setting speed.
The refrigerated chamber operates between −11 and 40 °C. For reproducible separations, pre-cool the rotor and chamber to the target temperature before loading samples, and avoid blocking the air vents to maintain cooling performance.
Inspect rotors for corrosion or cracks before each use, and clean the chamber with a neutral detergent to prevent sample residue buildup. Follow the manufacturer’s maintenance schedule for rotor life and safety inspections.
Selection & Integration Q&A
Choose the 5427 R for high-throughput work requiring up to 48 × 1.5/2.0 mL capacity and refrigeration down to −11 °C. The 5425 R offers lower capacity, while the 5420 is non-refrigerated; select the 5427 R when both cooling and higher tube count are needed.
The 5427 R accepts 9 rotor types, including fixed-angle and swing-bucket rotors. Confirm that the rotor’s maximum RCF and tube format match your application; for 1.5/2.0 mL tubes, use rotors rated for at least 25,001 × g if full speed is required.
Rotors and adapters are ordered separately; the base unit does not include tubes, bottles, or the VisioNize box for remote monitoring. Regular rotor inspection and chamber cleaning supplies are user-provided. Refer to the brochure for the full rotor list.