Eppendorf CryoCube ® F440 Series - ULT Freezer
Eppendorf CryoCube ® F440 Series - ULT Freezer — Ultra-low temperature freezers with Capacity 440 L.
The CryoCube F440h is a 440 L ultra-low temperature freezer using vacuum insulation paneling (Type C) and air cooling, with a −50 to −86 °C working range and 5 inner compartments. It is the high-efficiency VIP variant of the F440 series, distinguished from the foam-insulated F440n by its insulation construction. It serves as a storage stage for high-density sample archives at −80 °C.
Full specifications
| Capacity | 440 L |
| Act Label | yes |
| Average Daily Consumption (115 V) | 6.5 kWh/day |
| Average Daily Consumption (208 V) | − |
| Average Daily Consumption (230 V) | 6.8 kWh/day |
| Chart Recorder | no |
| Co 2 Backup System | no |
| High-efficiency | yes |
| Insulation | vacuum insulation paneling |
| Ln 2 Backup System | no |
| Nominal power | 283 W |
| Remote Device Monitoring And Notifications (visionize ® ) | VisioNize ® box enabled |
| Temperature range | -50...-86 °C |
| No. of compartments mfr | 5 |
| No. of internal doors mfr | 5 |
| Max. racks per freezer mfr | 20 |
| Dimensions (W × D × H) mfr | 95,5 × 89,8 × 195,0 cm / 37,6 × 35,4 × 76,8 in 1 |
| Pull-down time to -80 °C mfr | 3 h 20 min 4) |
| 53 mm (2 in) tall boxes mfr | 320 |
| 64 mm (2.5 in) tall boxes mfr | 240 |
| 76 mm (3 in) tall boxes mfr | 160 |
| 89 mm (3.5 in) tall boxes mfr | 160 |
| 102 mm (4 in) tall boxes mfr | 160 |
| 102 mm (4 in) tall boxes mfr | 480 |
| 53 mm (2 in) tall boxes mfr | 16 |
| 64 mm (2.5 in) tall boxes mfr | 12 |
| 76 mm (3 in) tall boxes mfr | 8 |
| 89 mm (3.5 in) tall boxes mfr | 8 |
| 102 mm (4 in) tall boxes mfr | 8 |
| DWP mfr | 24 |
| Footprint (wxd) | 95.5 cm |
| Product Weight | 286 kg |
| Shipping Weight | 327 kg |
| Max. Power Consumption | 6800 W |
| Power supply mfr | 230 V, 50 Hz |
| Power Plug | type F/type G |
| Access port mfr | 2 |
| Cooling Liquid | 290 |
| Noise level | 51.5 dBA |
| Cooling type | air cooling |
Description
Construction and series positioning
- The F440h is the vacuum-insulation-panel (VIP) variant of the 440 L CryoCube F440 series; the sibling F440n uses polyurethane foam (Type A).
- Cabinet dimensions are 95.5 × 89.8 × 195.0 cm (W × D × H); footprint width is 95.5 cm.
- Five internal compartments with five internal doors; up to 20 racks per freezer.
- Two access ports are provided through the cabinet wall.
- Product weight 286 kg; shipping weight 327 kg.
Capacity and storage configuration
- Box capacity depends on box height: 320 boxes at 53 mm (2 in), 240 at 64 mm (2.5 in), 160 at 76 mm (3 in), 160 at 89 mm (3.5 in), and 160 at 102 mm (4 in).
- Per-compartment counts are 16, 12, 8, 8 and 8 boxes for the same height sequence; DWP is 24.
- The 102 mm (4 in) row appears twice with 160 and 480 boxes; the 480 figure is not used here because the configuration label is ambiguous.
Thermal and electrical behavior
- Working temperature range is −50 to −86 °C; pull-down time to −80 °C is 3 h 20 min.
- Cooling is air cooling; insulation is vacuum insulation paneling; the unit is marked high-efficiency.
- Power supply is 230 V, 50 Hz; nominal power 283 W; maximum power consumption 6800 W; power plug type F/type G.
- Average daily consumption is 6.5 kWh/day at 115 V and 6.8 kWh/day at 230 V; the 208 V entry is marked “−”.
- Noise level is 51.5 dBA.
Monitoring and options
- VisioNize box enabled for remote device monitoring and notifications.
- No chart recorder, no CO2 backup system, and no LN2 backup system are fitted.
- The cooling-liquid field reads “290” without a unit or label; it is not interpreted here.
Integration & Operating Notes
Nominal power is 283 W, but maximum power consumption is 6800 W, so the branch circuit, breaker and upstream distribution must be sized for the peak figure rather than the nominal one. The 230 V, 50 Hz supply and type F/type G plug define the socket and cord set required at the installation point.
The unit weighs 286 kg in operation and 327 kg when shipped, with a 95.5 cm width and 195.0 cm height. Plan the transport route, door clearances and floor loading for the shipping weight before moving the cabinet into place, and confirm the final floor can support the installed mass.
The cabinet requires 3 h 20 min to reach −80 °C, so loading warm samples immediately after start-up exposes them to a temperature above the setpoint for that period. Sequence the pull-down before transferring inventory, and account for recovery time after door openings in the storage protocol.
The freezer is VisioNize box enabled, which provides remote device monitoring and notifications, but no chart recorder, CO2 backup or LN2 backup is fitted. If continuous local records or backup cooling are required, those must be specified as separate equipment rather than assumed present in the base unit.
Cooling is by air, so the condenser and air path require periodic cleaning to maintain heat rejection; a clogged path raises duty cycle and power draw toward the 6800 W maximum. Two access ports are available for routing independent sensors or cables without disturbing the door seal.
Selection & Integration Q&A
The F440h uses vacuum insulation paneling (Type C) and is marked high-efficiency; the F440n uses polyurethane foam (Type A). Choose the h variant where energy use and insulation thickness matter; choose the n variant where a foam cabinet is preferred. Both share 440 L, 5 compartments and the −50 to −86 °C range.
Provide a 230 V, 50 Hz supply with a type F or type G socket. Size the circuit for the 6800 W maximum power consumption, not the 283 W nominal figure, and allow for the 6.8 kWh/day average consumption at 230 V when planning energy and backup capacity.
The cabinet weighs 286 kg installed and 327 kg shipped at 95.5 × 89.8 × 195.0 cm, so the floor and route must be rated accordingly. Air cooling requires unobstructed airflow around the cabinet; noise is 51.5 dBA. Pull-down to −80 °C takes 3 h 20 min, which sets the minimum lead time before loading.
No chart recorder, no CO2 backup system and no LN2 backup system are fitted. Remote monitoring and notifications require the VisioNize box, for which the unit is enabled. Two access ports are built in for routing external sensor or cable runs; racks and boxes are separate items.