No photo available yet
Eppendorf epMotion ® 5070 - Small and Compact Automated Pipetting
Eppendorf epMotion ® 5070 - Small and Compact Automated Pipetting — Automated pipetting systems.
The epMotion 5070 is a compact air-cushion automated pipetting system with a 0.2–1 mL working range, built for PCR/qPCR setup and normalization. Its 65 × 48 × 63 cm footprint, 45 kg mass and 200 W maximum draw place it as the small-frame member of the epMotion line, with four SLAS/ANSI deck positions and a 19.5-inch touch panel for on-deck programming.
Full specifications
| Application | PCR/qPCR and normalization |
| Autoclavable | yes |
| Consumables | epT.I.P.S. motion tips as racks or reload |
| Dimensions (w × D × H) | 65 x 48 x 63 cm |
| Interfaces | 4 |
| Operating Mode | automation |
| Pipetting Type | Air-cushion system |
| Pipetting volume | 0.2...1 mL |
| SLAS/ANSI positions mfr | 4 |
| Touch panel mfr | 19.5'' diagonal |
| Product Weight | 45 kg |
| Max. Power Consumption | 200 W |
| Voltage | 100 – 240 V |
Description
Construction and positioning
- Air-cushion pipetting head covering 0.2–1 mL; this is the small-volume modification of the epMotion series, distinguished by its compact 65 × 48 × 63 cm frame and 45 kg weight.
- Deck provides 4 SLAS/ANSI positions, so labware is limited to four standard plate/frame slots — the defining constraint versus larger deck configurations.
- Consumables are epT.I.P.S. motion tips, supplied as racks or in reload format; the tip format is specific to the motion head and is not interchangeable with manual pipette tips.
Operation and control
- Operating mode is full automation; the 19.5-inch diagonal touch panel is the primary local interface, and 4 interfaces are available for external connection.
- Pipetting is air-cushion (positive displacement is not used), so tip fit and liquid viscosity/volatility affect accuracy in the usual air-cushion manner.
- Autoclavable components are declared, allowing decontamination of the affected parts by autoclaving.
Electrical and environment
- Wide-range input of 100–240 V accommodates both 100–120 V and 220–240 V laboratory supplies without a voltage selector; maximum power consumption is 200 W.
- No cooling, heating or vacuum services are specified for this model; the process media are liquids handled through the tip racks.
Integration & Operating Notes
Volumes below 0.2 mL or above 1 mL fall outside the specified pipetting range of this modification. For PCR/qPCR and normalization workflows, confirm that every transfer in the protocol lies inside 0.2–1 mL, otherwise a different epMotion modification or a dilution step is required.
Selection & Integration Q&A
Pick the 5070 when the protocol fits 0.2–1 mL transfers and no more than 4 SLAS/ANSI deck positions, and bench space is limited to a 65 × 48 cm footprint. Larger deck or wider-volume work needs a different epMotion modification, since the 5070's range and 4-position deck are fixed.
The deck takes SLAS/ANSI-format labware in its 4 positions, and pipetting requires epT.I.P.S. motion tips, ordered as racks or reloads. Neither tips nor labware are part of the base delivery, so both must be specified alongside the instrument.
Autoclavable components are declared and may be sterilized between runs. Per run, epT.I.P.S. motion tips (rack or reload) are consumed and must be restocked; they are not included with the instrument.