Eppendorf Eppendorf Top Buret - Bottle-Top Burette
Eppendorf ·Made in Germany · In Active Production

Eppendorf Eppendorf Top Buret - Bottle-Top Burette

Eppendorf Eppendorf Top Buret - Bottle-Top Burette — Pipettes.

The Eppendorf Top Buret is a mechanical bottle-top burette using positive displacement, with a 0.01–999.9 mL range and 2.5 mL per-turn dispensing increment. It mounts directly on GL 45 laboratory bottles via included adapters (GL 32, GL 38, S 40), and is intended for precise, repetitive liquid dispensing in laboratory workflows.

Full specifications

Core Performance & Functional Specifications
Autoclavable no
Open System (third Party Consumables) yes
Operating Mode mechanical
Pipetting Type Positive displacement system
Pipetting volume 0.01...999.9 mL
Random Measurement Error 1) 2.5 mL
Systematic Measurement Error 1) 2.5 mL
Dispensing increment mfr 2.5 mL per turn
Delivery content mfr Burette, Battery LR03/AAA 1.5V (x2), Operating m
Dimensions, Weight & Mechanical Design
Number Of Channels 1
Electrical, Power & Drive Specifications
Battery Type AAA battery
Interfaces, Connections & Control
Thread mfr GL 45
Bottle thread adapter incl. mfr GL 32, GL 38, S 40 2)

Description

Construction and positioning

Dispensing behavior

Installation and operation

Integration & Operating Notes

Mounting
Bottle neck must match one of the supplied GL adapters

The burette threads onto GL 45; bottles with GL 32, GL 38, or S 40 necks require the corresponding included adapter. Verify the bottle thread before installation, because an unmatched neck will not seal and will prevent proper aspiration.

Factory Specification Sheet, extra specs (Thread, Bottle thread adapter incl.
Electrical
Two AAA batteries are the only power source

The unit is mechanical with a battery-powered display/control; two LR03/AAA 1.5 V batteries are included. Plan for battery replacement as a consumable, and note that no external power supply or controller interface is specified.

Factory Specification Sheet, extra specs (Delivery content
Process Limits
Stated measurement error is 2.5 mL for both random and systematic

Because both error figures are given as 2.5 mL, dispensing small volumes (e.g., below a few milliliters) will carry a large relative uncertainty. Use this burette for larger-volume work where a 2.5 mL error is acceptable, and do not assume microliter-level accuracy.

Factory Specification Sheet, specs (random-measurement-error-1, systematic-measurement-error-1
Maintenance
Unit is not autoclavable; clean without steam sterilization

The autoclavable spec is 'no', so do not autoclave the burette. Cleaning and decontamination must follow the operating manual's chemical-compatibility guidance; the attached services brochure covers pipette calibration only and does not define a service interval for this burette.

Factory Specification Sheet, specs (autoclavable); Services Brochure (scope

Selection & Integration Q&A

When should I choose this bottle-top burette rather than a different pipette variant?

Choose it for repetitive dispensing from a GL 45 bottle in the 0.01–999.9 mL range with 2.5 mL per-turn resolution. If you need microliter accuracy or autoclavable wetted parts, this unit is not suitable; no sibling models are defined in the verified data for comparison.

What bottle and adjacent hardware must be compatible with the Top Buret?

It mounts on a GL 45 bottle; included adapters cover GL 32, GL 38, and S 40 necks. The telescopic aspirating tube adjusts to bottle depth, and the discharge tube with knurled nut connects to the canula arm. No external drive, controller, or power supply is required beyond two AAA batteries.

What are the mounting and duty-cycle limits from the manual?

The unit is not autoclavable and uses a positive-displacement path, so it must be mounted upright on a matching bottle thread and kept within the chemical compatibility of its wetted parts. No duty-cycle or environmental limits are stated in the verified facts or the attached services brochure.

What maintenance and consumables are needed, and what is not included?

Base delivery includes the burette, two AAA batteries, canula arm, discharge tube with knurled nut, tube holder, telescopic aspirating tube, and three thread adapters. Batteries are consumable; no calibration or service interval for this burette is defined in the attached services brochure, which covers pipette calibration only.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Services Brochure Services Pipettes Pipette Service Done Right
Brochure ·2,8 МБ ·8 pp.
View PDF