No photo available yet

Eppendorf ·Made in Germany · In Active Production

Eppendorf Innova ® S44i - Stackable Incubator Shaker

Eppendorf Innova ® S44i - Stackable Incubator Shaker — Laboratory shakers.

The Innova S44i is a stackable, non-refrigerated incubator shaker with a 76 cm slide-out platform and a 10–80 °C temperature range. Its Eppendorf X-Drive and solid-state DC brushless motor deliver 20–400 rpm at 2.5 cm orbit or 20–300 rpm at 5.1 cm orbit. It serves as a high-capacity incubation and shaking station in bioprocess and microbiology workflows.

Full specifications

Core Performance & Functional Specifications
Audible And Visual Alarms yes
Benchtop (b), Under Bench (u), Floor (f) Or Stackable (s) F, S
Door Opening glide up
Drive Mechanism Eppendorf X-Drive
Memory non volatile with automatic power failure restart
Motor Type Solid state, DC brushless motor
Platform Size (cm/in) 76 cm
Programming Steps / Storable Programs unlimited/unlimited
Refrigerated no
Remote Device Monitoring And Notifications (visionize ® ) VisioNize ® touch enabled
Slide-out Platform yes
Temperature range 10...80 °C
Timer mfr 0.01 – 95.59 h, continuous
Dimensions (W × D × H) mfr 118,2 × 86,9 × 63 cm / 46,5 × 34,2 × 24,8 in
Temperature uniformity mfr ±0.25 °C at 37 °C and 250 rpm
Speed range mfr 2.5 cm orbit: 20 – 400 rpm, 5.1 cm orbit: 20 – 3
Steps per program mfr unlimited
Stored programs mfr unlimited
Capacity mfr extra large
Dimensions, Weight & Mechanical Design
External Height (with Lid/door Open) 115.8
Product Weight 186 kg
Electrical, Power & Drive Specifications
Power supply mfr 230 V ± 10 %, 50/60 Hz
Interfaces, Connections & Control
Data Export Interface USB, Ethernet
Power Plug power plug type F
Standards, Safety & General Data
Cetlus And Ce Marked yes

Description

Construction and positioning

Drive and motion

Temperature and control

Installation and operation

Integration & Operating Notes

Mounting
Allow 115.8 cm vertical clearance for the glide-up door

The door opens upward and the external height with the lid open is 115.8 cm. Benchtop or stacked installations must reserve this clearance above the unit to avoid interference with shelves, ceilings, or upper equipment.

Factory Specification Sheet
Electrical
Requires 230 V ± 10 %, 50/60 Hz supply with type F plug

The unit is configured for 230 V ± 10 % at 50/60 Hz and is fitted with a type F power plug. Verify that the site supply matches this voltage and frequency and that the receptacle is compatible; no other voltage variant is listed for this model.

Factory Specification Sheet
Control & I/O
USB and Ethernet enable data export and VisioNize monitoring

Data export interfaces include USB and Ethernet, and the unit is VisioNize touch enabled for remote device monitoring and notifications. Network and USB connections should be planned if data logging or remote alerts are required.

Factory Specification Sheet
Process Limits
Speed range depends on the installed orbit

With a 2.5 cm orbit the speed range is 20–400 rpm; with a 5.1 cm orbit it is 20–300 rpm. The applicable orbit must be confirmed before setting process parameters, as the maximum speed differs between configurations.

Factory Specification Sheet
Process Limits
Temperature uniformity is specified at 37 °C and 250 rpm

The ±0.25 °C uniformity figure applies at 37 °C and 250 rpm. Operation outside these conditions may yield different uniformity; users should validate performance at their actual setpoint and shaking speed.

Factory Specification Sheet
Maintenance
No maintenance schedule is provided in the supplied documents

The available factory specification and flyer do not include service intervals, error codes, or consumables. Maintenance planning should follow Eppendorf’s official instructions for the Innova S44i, which are not part of the supplied material.

Factory Specification Sheet; Shakers Flyer

Selection & Integration Q&A

When should I choose the Innova S44i over the New Brunswick Innova 44/44R?

Choose the S44i for its Eppendorf X-Drive, 76 cm slide-out platform, VisioNize touch-enabled monitoring, and 10–80 °C range. The Innova 44/44R is positioned as an economical workhorse; select it when advanced drive and connectivity features are not required.

What accessories or consumables are included, and what maintenance is required?

The supplied documents do not list included accessories, cables, or consumables, nor do they specify maintenance intervals. Users should refer to Eppendorf’s official documentation for the S44i for delivery contents and service schedules.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Shakers Flyer Innova S44i New Brunswick Innova 44 44R Stackable Incuba
Brochure ·775,8 КБ ·2 pp.
View PDF