Eppendorf Mastercycler ® X40 - PCR Thermocycler
Eppendorf Mastercycler ® X40 - PCR Thermocycler — Thermal cyclers (PCR).
The Mastercycler X40 is a 96-well PCR thermocycler with an aluminum block driven by three Peltier elements, reaching 3.3 °C/s heating and 1.5 °C/s cooling. It offers a 4–99 °C block range, a 12-column gradient spanning 1–30 °C within 30–99 °C, and four temperature-control modes (Fast, Intermediate, Standard, Safe). It serves as the amplification core in molecular biology workflows, with Ethernet/USB and VisioNize touch connectivity.
Full specifications
| Act Label | yes |
| Dimensions (w × D × H) | 24,5 × 38,5 × 23 cm |
| Gradient Block | 12 |
| Gradient Range | 1...30 °C |
| Gradient Temperature Control Range | 30...99 °C |
| Heating Rate | 3.3 °C/s |
| Heating Technology | Three peltier elements |
| Interfaces | Ethernet, USB |
| Lid Descent | SafeLid with thermal sample protection |
| Lid Temperature Range | 37...110 °C |
| Remote Device Monitoring And Notifications (visionize ® ) | VisioNize ® touch enabled |
| Sample Capacity | 96 |
| Temperature Control Range Of The Block | 4...99 °C |
| Thermoblock | Aluminum |
| Total Weight | 7.25 kg |
| Max. Power Consumption | 500 W |
| Voltage | 100 – 240 V |
| Temperature Control Mode | Fast, Intermediate, Standard, Safe |
| Touchscreen Interface mfr | yes |
| Cooling Rate | 1.5 °C/s |
Description
Construction and positioning
- Single 96-well aluminum thermoblock heated and cooled by three Peltier elements; no sibling variants are defined in the supplied facts, so this card describes the X40 configuration only.
- Sample capacity 96; block temperature control range 4–99 °C; lid temperature adjustable 37–110 °C via SafeLid with thermal sample protection.
- Physical envelope 24.5 × 38.5 × 23 cm (W×D×H), 7.25 kg; touchscreen interface plus Ethernet and USB.
Thermal behavior and modes
- Ramp performance is asymmetric: heating up to 3.3 °C/s, cooling up to 1.5 °C/s; these are instrument rates, not sample rates, and actual sample ramps depend on consumable and reaction volume.
- Four selectable control modes — Fast, Intermediate, Standard, Safe — trade speed against overshoot/undershoot and uniformity; the Safe mode is the conservative choice for sensitive assays.
- Gradient function spans 12 columns with a 1–30 °C spread, usable only within the 30–99 °C gradient temperature control range; below 30 °C the gradient is not available.
Installation, connection and operation
- Mains input 100–240 V, 50/60 Hz class; motor power rating 500 W. No country-specific plug variant is stated in the facts.
- Ethernet and USB interfaces support local data export and network connection; VisioNize touch enables remote monitoring and notifications.
- The supplied document digest covers consumables (twin.tec PCR plates, deepwell plates, sealing films/foils/mats) and contains no instrument installation or service procedures; operating details beyond the spec table are therefore not asserted here.
Integration & Operating Notes
The instrument accepts 100–240 V, so no step-up/step-down transformer is needed; however, the facts do not specify a plug type or included cable, so the mains cord and any country adapter must be confirmed against the delivery scope before installation.
The SafeLid heated lid is specified for 37–110 °C; setting a lid temperature outside this window risks either condensation on tube caps (too low) or sample evaporation/pressure effects (too high), so heated-lid setpoints in protocols must be clamped to this range.
Selection & Integration Q&A
The supplied facts define no sibling models, so selection cannot be positioned against neighbors. Choose the X40 when a 96-well aluminum block, 4–99 °C range, 12-column 1–30 °C gradient and 3.3/1.5 °C/s ramps fit the assay; confirm any other variant's capacity and gradient directly with the vendor.
It needs 100–240 V mains, an Ethernet or USB connection for data/VisioNize monitoring, and 96-well PCR plates with compatible sealing films, foils or mats from the consumables catalog; plates and seals are not included with the instrument and must be ordered separately.
No service interval is stated in the supplied documents. Plan for consumables (twin.tec 96-well plates, sealing films/foils/mats) and a mains cord set matching the local outlet, since plug type and included cables are not specified; periodic block cleaning and calibration should be scheduled per the vendor's manual.