Labconco Canopy Hoods
Labconco · In Active Production

Labconco Canopy Hoods

Labconco Canopy Hoods — Fume hoods.

The Labconco Canopy Hood is a wall-mounted, epoxy-coated capture canopy with an integral baffle, supplied in 4-foot (4799000) and 6-foot (7099000) configurations. It is a special-purpose hood for heat, steam, or odor-generating apparatus such as tissue processors, steam baths, and open Kjeldahls, and is rated on a theoretical face 1 ft below the hood.

Full specifications

Core Performance & Functional Specifications
Airflow 785 CFM
Dimensions, Weight & Mechanical Design
Width 4 ft
Sash stop height mfr 18.0 in
Work surface depth mfr 1.25 in
Overall width (A) mfr 72.0 in
Dimension B mfr 67.5 in
Dimension C mfr 32.5 in
Dimension D mfr 36.0 in
Electrical, Power & Drive Specifications
Electrical requirements mfr 208 A

Description

Construction and series positioning

Behavior under load

Installation and operation

Integration & Operating Notes

Mounting
Ceiling anchors must carry the front of the hood via 3/8 in rod

The hood is not self-supporting at the front: the back bears on the wall and the front hangs from 3/8 in threaded rod anchored to the ceiling, with wire or cable permitted as a substitute. Structural planning must include ceiling anchor points rated for the hood and any apparatus below it.

CanopyHood.pdf, Installation, p.6
Process Limits
Rated capture assumes apparatus within 1 ft of the hood face

Face velocity and static pressure performance are based on a theoretical hood face 1 ft below the hood. Apparatus placed lower than that plane loses capture efficiency, while apparatus brought inside the 1-ft face improves it, so bench and apparatus height must be fixed before the exhaust is balanced.

CanopyHood.pdf, Installation / Hood Efficiency, p.6
Process Limits
Do not use in explosive atmospheres without certified components

The standard Canopy Hood ships without explosion-proof electrical components. Flammable or explosive atmospheres require an explosion-proof configuration fitted and installed per all pertinent electrical codes; the base unit must not be placed in a classified location.

CanopyHood.pdf, Safety Precautions, p.8; General Description, p.5
Maintenance
Inspect for transit damage before discarding packaging

The carton contains the hood assembly and the instruction manual only. Check for transit damage before discarding packaging so that freight claims can be raised; no blower, ductwork, or mounting hardware is included in the shipment.

CanopyHood.pdf, Components Shipped

Selection & Integration Q&A

When should I choose the 4-foot Canopy Hood over the 6-foot model?

Pick the 4-foot (4799000) when the apparatus footprint fits its 4 ft width and the exhaust can deliver 907–1,360 CFM at up to 0.64–1.25 in static loss. Move to the 6-foot (7099000) for larger or multiple apparatus, which needs 1,289–1,934 CFM at 0.90–1.65 in.

What exhaust blower and duct requirements does the hood impose on the adjacent system?

The hood is passive, so the blower must be sized against the published static pressure limits at airflow: for the 4-foot unit, no more than 0.64 in at 907 CFM and 1.25 in at 1,360 CFM. Ductwork and fan curves must meet these points, since the hood provides no fan or damper.

What mounting and environment limits apply to the Canopy Hood?

Mount the back against a wall and support the front from the ceiling with 3/8 in threaded rod (wire or cable acceptable). Keep apparatus within 1 ft of the hood face for rated capture, and do not install in flammable or explosive atmospheres without an explosion-proof configuration.

What is included with the hood, and what must be ordered separately?

The shipment contains only the hood assembly and the instruction manual. Exhaust blower, ductwork, ceiling anchors and 3/8 in threaded rod, and any electrical or alarm components are not included and must be specified separately; there is no scheduled maintenance interval stated in the manual.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Educational Fume Hoods & Enclosures Catalog
Brochure ·6,9 МБ ·32 pp.
View PDF
PDF
Canopy Laboratory Hoods Manual
Manual ·119,4 КБ ·10 pp.
View PDF