No photo available yet

Nabertherm ·Made in Germany · In Active Production

Nabertherm HG 5208/S

Nabertherm HG 5208/S — Fusing.

The HG 5208/S is a top-hat fusing furnace with wire heating and a fixed table, built for 3-phase industrial power and a maximum temperature of 900 °C. Its 3100 × 2100 × 800 mm inner chamber and 5000 kg mass distinguish it as a large-format modification within the series. It is intended for batch fusing and heat-treatment processes requiring overhead access to the load.

Full specifications

Core Performance & Functional Specifications
Electrical connection 3-phase
Heating power 110 watt
Floor space mfr 6.51
Inner dimensions (W × D × H) mfr 3100 × 2100 × 800 mm
Outer dimensions (W × D × H) mfr 3990 × 2590 × 3140 mm
Dimensions, Weight & Mechanical Design
Weight 5000 kg
Operating Conditions, Environment & Protection
Max temperature 900 °C

Description

Construction and series positioning

Thermal behavior and media

Control and operation

Integration & Operating Notes

Mounting
Floor loading from 5000 kg unit and 6.51 floor-space footprint

The 5000 kg mass and 3990 × 2590 mm outer footprint require a structural assessment of the installation floor before placement. The top-hat design also needs vertical clearance for the lift path, which is not documented in the supplied digests.

Factory Specification Sheet
Control & I/O
Controller platform documented separately from furnace model

The controller digest describes the 500 series and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but gives no model-specific configuration for the HG 5208/S. Controller selection and thermocouple wiring must be confirmed against the furnace order documentation.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the HG 5208/S rather than another modification in the top-hat wire-heating series?

Choose it when the load fits the 3100 × 2100 × 800 mm chamber and process temperature stays at or below 900 °C. No sibling models are supplied, so comparison against other sizes cannot be made from the available facts.

What supply and controller infrastructure must be planned around this furnace?

A 3-phase supply is confirmed, but the listed 110 W heating power is not usable for sizing; take the connected load from the nameplate. The controller platform (500 series / MyNabertherm) is documented separately and must be matched to the furnace order.

What mounting and environment limits apply to the HG 5208/S installation?

The 5000 kg mass and 3990 × 2590 mm outer footprint demand a verified floor load capacity. The top-hat lift requires vertical clearance above the unit; the supplied documents give no clearance or ambient-temperature figures, so these must come from the model manual.

What maintenance schedule and delivery accessories are defined for this model?

No maintenance intervals, error codes or consumables are specified in the supplied digests. The controller document mentions recorder and instrumentation options but no included accessories; the base-delivery scope and service plan must be confirmed from the order documentation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF