Nabertherm KTR 3100
Nabertherm ·Made in Germany · In Active Production

Nabertherm KTR 3100

Nabertherm KTR 3100 — Heating Cabinets Chamber Ovens.

The KTR 3100 is a 3100-litre electrically heated chamber oven with a 260 °C maximum temperature, built for bulk thermal processing in a 1250 × 1250 × 2000 mm chamber. Its 27 kW heating power and 3-phase connection place it at the large end of the KTR series, above the KTR 1500 and below the KTR 22500. It serves as a high-throughput batch oven for preheating, drying, or tempering loads that fit the tall chamber format.

Nabertherm KTR Series — Model Comparison & Selection

Model Chamber volume, LElectrical connectionMax temperature, °C
KTR 3100 Current 31003-phase260
KTR 6250 62503-phase260

Full specifications

Core Performance & Functional Specifications
Chamber volume 3100 l
Electrical connection 3-phase
Heating power in kW1 mfr 27
Inner dimensions (W × D × H) mfr 1250 × 1250 × 2000 mm
Outer dimensions (W × D × H) mfr 2115 × 1680 × 2960 mm
Operating Conditions, Environment & Protection
Max temperature 260 °C

Description

Construction and series positioning

Behavior and media

Control and operation

Integration & Operating Notes

Electrical
27 kW on 3-phase requires a dedicated high-current supply

The 27 kW heating power on a 3-phase connection implies a supply and protection scheme sized for the full heating load, not just the controller and fan. Confirm the site's available three-phase capacity and cable cross-section before installation; the unit cannot be run from a single-phase or shared lighting circuit.

Factory Specification Sheet
Process Limits
260 °C ceiling excludes higher-temperature processes

The maximum temperature of 260 °C is the upper bound for every charge and program. Processes requiring 300 °C belong to the TR oven line, and 900 °C work to the NAT/NA forced-convection chamber furnaces; do not attempt to extend the KTR 3100 setpoint to cover such duties.

Fiber optics glass catalog section
Process Limits
Solvent or combustible charges need an LS safety variant

Safety technology per EN 1539 is offered as an LS variant on TR and KTR models, and the KTR 3100 as specified carries no LS designation. If the load releases solvents or flammable vapours, the standard chamber is not the correct configuration; specify the LS version instead of adding ad-hoc ventilation.

Fiber optics glass catalog section
Control & I/O
Controller platform documented at series level only

The available controller documentation covers Nabertherm series 500 and the MyNabertherm app, including process data storage and AMS2750F instrumentation types, but prints no KTR 3100-specific wiring or option list. Obtain the model-specific connection diagram and option sheet from the factory before designing signal interfaces.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the KTR 3100 rather than the KTR 1500 or KTR 22500?

Pick the KTR 3100 when the load needs roughly 3 m³ in a tall 1250 × 1250 × 2000 mm chamber at up to 260 °C. The KTR 1500 suits smaller batches; the KTR 22500 is for much larger volumes. Confirm charge geometry against the chamber height before deciding.

What supply and protection does the 27 kW 3-phase connection demand from the plant?

The 27 kW heating power on a 3-phase connection sets the supply, cable, and protection sizing; the controller and fan draw are secondary. Verify the site's three-phase capacity and breaker rating against the model-specific connection data from the factory before installation.

What maintenance and accessories are not part of the base delivery?

The supplied documents list no maintenance intervals, spare parts, or included accessories for the KTR 3100. Controller options, recorders, and AMS2750F instrumentation are catalogued separately from the oven, so request the model-specific option list and service schedule from Nabertherm.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF