Nabertherm KTR 6125
Nabertherm KTR 6125 — Laboratory ovens.
The KTR 6125 is a 6100-litre chamber oven from Nabertherm's KTR series, rated to 260 °C and powered by a 3-phase electrical connection. Its 1750 × 1750 × 2000 mm chamber distinguishes it as the mid-size unit between the KTR 1500 and KTR 6250 siblings. It serves bulk thermal processing of large loads where uniform temperature up to 260 °C is required.
Nabertherm KTR Series — Model Comparison & Selection
| Model | Chamber volume, L | Heating power, W | Electrical connection | Max temperature, °C |
|---|---|---|---|---|
| KTR 6125 Current | 6100 | 45 | 3-phase | 260 |
| KTR 1500 | 1500 | 18 | 3-phase | 260 |
Full specifications
| Chamber volume | 6100 l |
| Chamber volume | 6100 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating power | 45 watt |
| Inner dimensions (W × D × H) mfr | 1750 × 1750 × 2000 mm |
| Outer dimensions (W × D × H) mfr | 2695 × 2175 × 2980 mm |
| Max temperature | 260 °C |
| Max temperature | 260 °C |
Description
Construction and series positioning
- The KTR 6125 is a floor-standing chamber oven with an internal working volume of 6100 l (1750 mm W × 1750 mm D × 2000 mm H) and external dimensions of 2695 × 2175 × 2980 mm.
- Within the KTR series, it sits between the smaller KTR 1500 and the larger KTR 6250; the 6125 is the intermediate choice when load volume exceeds the 1500 but does not require the 6250's capacity.
- The chamber is heated to a maximum temperature of 260 °C, consistent with the KTR series ceiling for chamber ovens.
Thermal behaviour and media
- No digitized curve points are available for this model; temperature uniformity and heating-rate data are not specified in the verified facts.
- The oven is intended for air-based thermal processing; no inert-gas or special-atmosphere provisions are documented for this model.
Electrical and control
- The electrical connection is 3-phase; the heating power value of 45 W in the source data is inconsistent with a 6100-l chamber and is therefore omitted from this overview.
- Controller and process-control details are not model-specific in the available documentation; the Nabertherm controller series 500 and MyNabertherm app are referenced in general documentation but their applicability to the KTR 6125 is not confirmed.
Installation and operation
- No installation, connection, or operating specifics for the KTR 6125 are provided in the document digests; the manuals cover other product lines or general controller functions.
Integration & Operating Notes
The oven is specified for a 3-phase electrical connection. The heating power figure of 45 W in the source data is implausible for a 6100-l chamber and should not be used for supply sizing; confirm actual connected load with the manufacturer before designing the electrical feed.
General Nabertherm documentation describes controller series 500 and the MyNabertherm app, but no model-specific controller configuration is provided for the KTR 6125. Verify the supplied controller and any interface options with the manufacturer.
Selection & Integration Q&A
Choose the KTR 6125 when your load requires a 6100-l chamber (1750 × 1750 × 2000 mm) and temperatures up to 260 °C. The KTR 1500 is smaller; the KTR 6250 is larger. Select based on batch volume and available floor space.
The oven requires a 3-phase supply. The heating power value in the source data (45 W) is not credible for this chamber size and should not be used for sizing; obtain the actual connected load and protection requirements from Nabertherm before installing the feed.
No maintenance schedule or accessory list is provided in the verified facts for the KTR 6125. Controller options, recorders, and interface cables are mentioned in general documentation but are not confirmed as included. Consult the manufacturer for service intervals and optional equipment.