Nabertherm L 40/11 BO
Nabertherm ·Made in Germany · In Active Production

Nabertherm L 40/11 BO

Nabertherm L 40/11 BO — Thermal Cleaning Ashing.

The L 40/11 BO is a 40-litre ashing furnace with integrated catalytic post-combustion, rated to 1100 °C and powered by a 11.7 kW three-phase connection. Its 320 × 490 × 250 mm chamber accepts up to 200 of organic substances at a maximum evaporation rate of 2.1, distinguishing it from the smaller L 9/11 BO sibling. It is intended for thermal cleaning and ashing processes where exhaust gases must be post-combusted before release.

Full specifications

Core Performance & Functional Specifications
Chamber volume 40 l
Chamber volume 40 l
Electrical connection 3-phase
Electrical connection 3-phase
Nominal power 11.7 kW
Max. evaporation rate of organic substances mfr 2.1
Inner dimensions (W × D × H) mfr 320 × 490 × 250 mm
Outer dimensions (W × D × H) mfr 530 × 825 mm
Dimensions, Weight & Mechanical Design
Weight 110 kg
Weight 110 kg
Max. loading weight of organic substances mfr 200
Operating Conditions, Environment & Protection
Max temperature 1100 °C
Max temperature 1100 °C

Description

Construction and series positioning

Process behaviour

Electrical and control

Integration & Operating Notes

Process Limits
Chamber temperature must stay at or below 1100 °C

The 1100 °C maximum applies to the chamber; the catalytic post-combustion stage is part of the same model and its own permissible conditions are not stated in the verified facts. Any process recipe, including exothermic ashing of organic residues, must be validated so that the chamber limit is not exceeded during the load's own heat release.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the L 40/11 BO rather than the smaller L 9/11 BO in the same series?

Pick the L 40/11 BO when the charge needs the 40-litre, 320 × 490 × 250 mm chamber and the 200-unit organic loading limit at up to 2.1 evaporation rate. The L 9/11 BO is the smaller sibling; choose it only when its smaller chamber and lower load capacity still cover the batch, since the verified facts give no further L 9/11 BO data.

What supply and upstream protection does the 11.7 kW three-phase connection require?

The furnace is a three-phase, 11.7 kW load, so the site supply, cable cross-section and protective device must be sized for that furnace load rather than for a generic 40-litre unit. The verified facts do not state voltage or current, so the exact rating must be read from the order-specific nameplate before the electrical design is fixed.

What limits apply to the organic charge placed in the 40-litre chamber?

Two independent limits apply: a maximum loading weight of 200 and a maximum evaporation rate of 2.1. A heavy slow-evaporating charge and a light fast-evaporating charge can each breach one limit while satisfying the other, so every charge plan must be checked against both. The units for these values are not printed in the verified facts and must be confirmed on the factory data sheet.

What is included in base delivery for control and exhaust, and what must be ordered separately?

The integrated catalytic post-combustion is part of the L 40/11 BO model designation, but the verified facts list no controller, recorder, sensor or cable as included. The generic controller digest covers series 500 and MyNabertherm app functions without model-specific terminal data, so controller, recorder and cabling must be confirmed as order options against the order confirmation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF