Nabertherm L 9/11/SKM
Nabertherm L 9/11/SKM — Muffle furnaces.
The L 9/11/SKM is a 9-litre muffle furnace with embedded heating elements in a ceramic muffle, rated to 1100 °C on a 1-phase supply. Its 3.7 kW connected load brings the chamber to working temperature in 55 minutes, distinguishing this small-chamber modification within the L ../11 series. It serves laboratory ashing, sintering and heat-treatment tasks where a compact, contamination-resistant chamber is required.
Full specifications
| Chamber volume | 9 l |
| Electrical connection | 1-phase |
| Connected mfr | 3.7 |
| Heating time mfr | 55 min |
| Inner dimensions (W × D × H) mfr | 230 × 240 × 170 mm |
| Outer dimensions (W × D × H) mfr | 490 × 505 × 580 mm |
| Weight | 50 kg |
| Max temperature | 1100 °C |
Description
Construction and series positioning
- The L 9/11/SKM uses a ceramic muffle with heating elements embedded directly in the muffle wall, separating the heating winding from the working chamber and protecting it from process vapours and mechanical contact.
- Chamber volume is 9 l with inner dimensions of 230 × 240 × 170 mm (W × D × H); outer dimensions are 490 × 505 × 580 mm and unit weight is 50 kg.
- Within the L ../11 series, this is the small-chamber modification: the 9-litre volume and 3.7 kW connected load on a 1-phase supply suit bench-top or low-throughput laboratory use rather than larger batch chambers.
Thermal behaviour
- Maximum operating temperature is 1100 °C. The factory-stated heating time to working temperature is 55 minutes at the rated connected load of 3.7 kW.
- No digitized curve points were supplied for this model, so cool-down behaviour and part-load thermal response cannot be quantified from the available facts; the 55-minute figure applies to the heating phase only.
Control and operation
- The attached controller documentation covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and temperature-uniformity instrumentation per AMS2750F. These are controller-platform capabilities, not model-specific ratings; the controller variant actually fitted to this unit must be confirmed at order.
- No furnace-specific manual digest was supplied for the L 9/11/SKM, so installation clearances, connection details and operating sequences beyond the electrical and dimensional data above are not documented here.
Integration & Operating Notes
The furnace draws its full 3.7 kW connected load from a single-phase supply. The dedicated circuit, protective device and cable cross-section must be sized for this load plus the controller and any auxiliary equipment; an undersized circuit will trip during the 55-minute heat-up ramp when demand is continuous.
The 1100 °C maximum is the limit for the ceramic muffle and embedded heating elements. Controller setpoints, over-temperature protection settings and any connected programmer must be configured so the chamber cannot be driven above this value, since exceeding it risks muffle and element damage.
Selection & Integration Q&A
Choose the 9-litre SKM when batch size fits a 230 × 240 × 170 mm chamber and the 3.7 kW single-phase load and 55-minute heat-up suit your duty. Larger L ../11 chambers are warranted only when sample volume or throughput exceeds this envelope; no sibling data was supplied to compare further.
Provide a dedicated 1-phase circuit sized for the 3.7 kW connected load, and confirm the controller variant at order: the 500-series platform and MyNabertherm app support data storage and AMS2750F instrumentation, but these depend on the controller and options actually fitted.
No furnace-specific maintenance schedule or consumables list was supplied for this model. Controller documentation covers the 500-series platform and app; any recorder, over-temperature protection or data-logging option is a separate order item and must be specified with the controller, not assumed in base delivery.