Nabertherm LH 216/12
Nabertherm LH 216/12 — Prozesse Unter Schutzgasen.
The LH 216/12 is a 216-litre chamber furnace with brick insulation, rated to 1200 °C and powered by a 3-phase connection. Its 600 × 600 × 600 mm chamber distinguishes it from smaller siblings in the LH ../12 series, which range from 30 to 120 litres. It is intended for heat-treatment processes under protective gas where uniform temperature and moderate load volumes are required.
Full specifications
| Chamber volume | 216 l |
| Chamber volume | 216 l |
| Chamber volume | 216 l |
| Chamber volume | 216 l |
| Chamber volume | 216 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Connected mfr | 20 |
| Inner dimensions (W × D × H) mfr | 600 × 600 × 600 mm |
| Outer dimensions (W × D × H) mfr | 990 × 1280 × 1590 mm |
| Weight | 470 kg |
| Weight | 470 kg |
| Weight | 470 kg |
| Weight | 470 kg |
| Weight | 470 kg |
| Max temperature | 1200 °C |
| Max temperature | 1200 °C |
| Max temperature | 1200 °C |
| Max temperature | 1200 °C |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The LH 216/12 is the largest chamber-volume model among the listed LH ../12 siblings (LH 30/12, LH 60/12, LH 120/12), offering 216 l versus 30–120 l in the smaller units.
- It uses brick insulation, as indicated by the series designation, and is built as a floor-standing unit with outer dimensions of 990 × 1280 × 1590 mm and a weight of 470 kg.
- The chamber measures 600 × 600 × 600 mm (W × D × H), giving a cubic working volume suited to batch loads that exceed the capacity of the smaller LH models.
Thermal behaviour and process media
- Maximum operating temperature is 1200 °C, consistent with the /12 suffix shared by the sibling models.
- The category path places this furnace in processes under protective gases; no curve points or atmosphere-specific limits were supplied, so gas-flow or purge parameters must be taken from the separate furnace manual.
- No cooling curves or load-dependent data are available in the verified facts; temperature uniformity and heating rates should be confirmed against the controller documentation and factory test sheet.
Electrical and control architecture
- The furnace is connected to a 3-phase supply; the extra-spec entry “Connected: 20” is not accompanied by a unit and is therefore not interpreted here.
- Controller and process-data functions are described in the separate “Prozesssteuerung englisch” digest, which covers the 500-series controllers and MyNabertherm app but does not list model-specific wiring.
- Installation, connection and operation specifics for this exact model are not contained in the supplied document digests; refer to the model-specific operating manual for terminal assignments, fuse ratings and start-up sequencing.
Integration & Operating Notes
The controller digest covers 500-series functions, process-data storage and AMS2750F instrumentation types, but it does not map these to the LH 216/12. Specify the desired controller variant, recorder option and any digital interfaces at order time; do not assume they are included in the base furnace delivery.
Selection & Integration Q&A
Choose the LH 216/12 when the batch requires up to 216 l of chamber volume, roughly 600 × 600 × 600 mm. The smaller siblings offer 30–120 l and are preferable for low-mass loads or where floor space and 3-phase supply capacity are limited. All share the 1200 °C class.
The 3-phase supply rating, upstream protection and cable sizing must come from the model-specific nameplate, since the verified facts give no voltage or current. For protective-gas operation, the gas panel, purge controller and any exhaust handling must be specified separately; the base furnace data does not define them.
The verified facts list no maintenance intervals, spare parts or consumables, and no accessories such as recorder, controller options, gas-control hardware or cables are stated as included. These must be ordered separately and the service schedule confirmed from the furnace manual; the controller digest describes options but not delivery scope.