Nabertherm LHT 01/16 Turbo Fire
Nabertherm LHT 01/16 Turbo Fire — Dental sintering furnaces.
The LHT 01/16 Turbo Fire is a single-phase dental sintering furnace with a 65 × 65 × 30 mm work space and 85 × 85 mm charging area, reaching 1600 °C at 3.5 kW. Its 5 kg load capacity and 220 °C/min heating rate to 1000 °C distinguish it within the LHT series for rapid zirconia sintering cycles.
Full specifications
| Electrical connection | 1-phase |
| Maximum load | 5 kg |
| Nominal power | 3.5 kW |
| Work space dimensions2 in mm mfr | 30 |
| Max. heating rate up to 1000 °C mfr | 220 |
| Outer dimensions (W × D × H) mfr | 295 × 405 × 565 mm |
| Weight | 25 kg |
| Charging area in mm mfr | 85 |
| Max temperature | 1600 °C |
Description
Construction and series positioning
- The LHT 01/16 Turbo Fire is a compact, single-phase sintering furnace with a 65 × 65 × 30 mm work space and an 85 × 85 mm charging area, optimized for small dental restorations.
- It is the 'Turbo Fire' modification within the LHT dental sintering line, differentiated by its maximum 1600 °C temperature and a stated heating rate of 220 °C/min up to 1000 °C.
- Outer dimensions of 295 × 405 × 565 mm and a 25 kg weight allow benchtop installation; the 5 kg maximum load is well above typical dental batch weights.
Thermal behavior and load
- The 3.5 kW nominal power supports the high heating rate; no curve points are available, so behavior under load is defined by the 5 kg limit and the 1600 °C ceiling.
- The work space height of 30 mm constrains the height of sintering trays and stacked restorations; the charging area of 85 × 85 mm sets the maximum footprint of the load.
Control and operation
- The dental brochure lists the LHT 01/16 Turbo Fire alongside the D580 controller; process control options from the controller digest (500 series, MyNabertherm app) are available but not included by default.
- No installation or connection specifics are provided in the attached digests beyond the single-phase electrical connection.
Integration & Operating Notes
The furnace draws 3.5 kW on a 1-phase connection; verify the branch circuit and plug type can carry the full load without sharing with other high-draw equipment, since no derating or dual-voltage option is stated.
Exceeding the 5 kg maximum load or the 1600 °C maximum temperature risks element or insulation damage; the 30 mm work-space height also limits fixture stack height, so plan sintering trays accordingly.
The dental brochure pairs this model with the D580 controller, while the process-control digest covers 500-series controllers and the MyNabertherm app; confirm which controller is ordered, as the base furnace delivery does not state an included controller.
Selection & Integration Q&A
Choose it for fast cycles up to 1600 °C with small 65 × 65 × 30 mm loads; the 220 °C/min heating rate to 1000 °C suits rapid zirconia sintering. For larger batches or different temperature ceilings, compare other LHT ../17 D variants in the dental brochure.
It is a 1-phase, 3.5 kW unit; the dental brochure lists the D580 controller as the companion, and 500-series controllers with MyNabertherm app are documented separately. Confirm the controller is ordered with the furnace, as it is not stated as included.
The attached digests do not specify maintenance intervals or included accessories. The D580 controller and any 500-series controller or MyNabertherm app are separate items; sintering trays and fixtures must be sized to the 85 × 85 mm charging area and 30 mm height.