Nabertherm LHT 01/17 D
Nabertherm LHT 01/17 D — Dental sintering furnaces.
The LHT 01/17 D is a 1-litre, 1-phase dental sintering furnace reaching 1650 °C with a 30 kg maximum load. Its 110 × 120 × 120 mm chamber distinguishes it from the larger LHT 03/17 D sibling. It is intended for high-temperature sintering of dental zirconia and similar frameworks.
Nabertherm LHT Series — Model Comparison & Selection
| Model | Chamber volume, L | Maximum load, kg | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|---|
| LHT 01/17 D Current | 1 | 30 | 28 | 1-phase | 1650 |
| LHT 03/17 D | 3 | 75 | 38 | 1-phase | 1650 |
Full specifications
| Chamber volume | 1 l |
| Chamber volume | 1 l |
| Electrical connection | 1-phase |
| Electrical connection | 1-phase |
| Maximum load | 30 kg |
| Connected mfr | 1.95 |
| Max. heating rate up to 1000 °C mfr | 27 |
| Inner dimensions (W × D × H) mfr | 110 × 120 × 120 mm |
| Outer dimensions (W × D × H) mfr | 385 × 425 mm |
| Heating time mfr | 27 min |
| Weight | 28 kg |
| Weight | 28 kg |
| Max temperature | 1650 °C |
| Max temperature | 1650 °C |
Description
Construction and series positioning
- Chamber volume is 1 l; inner dimensions 110 × 120 × 120 mm (W × D × H).
- The series sibling LHT 03/17 D offers a larger chamber; the LHT 01/17 D is the compact 1-litre modification for smaller batches or space-constrained labs.
- Outer dimensions 385 × 425 mm (W × D); unit weight 28 kg.
- Electrical connection is 1-phase; connected load 1.95 (as labelled in the factory data).
Thermal behaviour
- Maximum temperature 1650 °C.
- Maximum heating rate up to 1000 °C is 27 (factory value; unit not stated in the source).
- Maximum load 30 kg.
- No digitized curve points were supplied, so no cool-down or controlled-rate profile can be quoted.
Control and operation
- The attached controller documentation covers the Nabertherm 500 series and MyNabertherm app, including process-data storage and temperature-uniformity instrumentation per AMS2750F.
- The dental brochure lists controller D580 alongside the LHT ../17 D series; confirm the delivered controller configuration at order.
- No installation, connection or maintenance specifics for this model appear in the supplied document digests.
Integration & Operating Notes
The furnace is a 1-phase unit with a connected load of 1.95 as printed in the factory data; the unit for this figure is not stated in the source, so verify it against the nameplate before specifying the supply circuit and protective device.
Maximum load is 30 kg and maximum temperature is 1650 °C. Exceeding either limit risks damage to the chamber and invalid sintering results; the 1-litre chamber (110 × 120 × 120 mm) physically constrains the batch anyway.
The controller digest covers the 500 series and MyNabertherm app with process-data storage and AMS2750F instrumentation types, but prints no furnace model codes; the dental brochure pairs the LHT ../17 D series with controller D580. Confirm the actual controller and any recorder option at order.
Selection & Integration Q&A
Pick the LHT 01/17 D for small batches: its 1-litre chamber (110 × 120 × 120 mm) and 28 kg unit weight suit compact labs. The LHT 03/17 D sibling offers a larger chamber when throughput per cycle matters more than footprint.
It is a 1-phase unit with a 1.95 connected load (unit not stated in the source; check the nameplate). Controller documentation covers the 500 series and MyNabertherm app, and the dental brochure pairs the series with controller D580; confirm the delivered controller before wiring.
Maximum load is 30 kg and maximum temperature 1650 °C; the factory data gives a heating rate of 27 up to 1000 °C (unit not stated). The supplied document digests contain no mounting clearances or duty-cycle rules for this model, so request the installation manual.
The supplied document digests list no maintenance intervals, error codes or consumables for this model, and no accessories or cables are identified as included or excluded. Obtain the operating manual and order checklist from Nabertherm before commissioning.