Nabertherm N 100/H
Nabertherm N 100/H — Chamber kilns.
The N 100/H is a 100-litre chamber kiln heated from five sides, reaching a maximum working temperature of 1340 °C with an 11 kW three-phase connection. Its 400 × 530 × 460 mm chamber distinguishes it within the series by volume rather than by any electrical variant. It is intended for high-temperature chamber firing and heat-treatment processes requiring uniform radiant heating from all sides.
Full specifications
| Chamber volume | 100 l |
| Electrical connection | 3-phase |
| Nominal power | 11 kW |
| Inner dimensions (W × D × H) mfr | 400 × 530 × 460 mm |
| Outer dimensions (W × D × H) mfr | 760 × 1150 mm |
| Weight | 330 kg |
| Max temperature | 1340 °C |
Description
Construction and series positioning
- The N 100/H is a chamber kiln of the five-side-heated series, with a 100 l chamber measuring 400 mm wide × 530 mm deep × 460 mm high.
- Outer dimensions are 760 mm wide × 1150 mm (depth/height as printed); unit weight is 330 kg.
- Within the series, the model code N 100/H denotes chamber volume (100 l); the H suffix is part of the model designation, not a rating. No sibling models are listed in the verified facts, so positioning is limited to the series' shared five-side heating architecture and 1340 °C ceiling.
Thermal behaviour
- Maximum temperature is 1340 °C; nominal connected power is 11 kW on a 3-phase supply.
- No digitized curve points or cool-down/heating-rate data are available in the verified facts, so no thermal-response claims are made here.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it does not print model-specific settings for the N 100/H.
- The remaining attached digests (fiber-optics glass, foundry, dental) cover other product lines and contain no N 100/H-specific installation or operating facts.
Integration & Operating Notes
The maximum temperature of 1340 °C is the upper process limit for this model. Exceeding it risks damage to the five-side heating elements and chamber lining; process recipes and controller setpoints must be capped accordingly.
Selection & Integration Q&A
Choose the N 100/H when a 100 l chamber (400 × 530 × 460 mm) at up to 1340 °C with 11 kW three-phase power matches the batch size. No sibling models are listed in the verified data, so compare chamber volume and power against other series members using their own datasheets.
A 3-phase feed sized for 11 kW nominal power. The verified facts do not state voltage or current, so confirm the nameplate rating before specifying cable, breaker and isolation. Floor support must carry 330 kg plus charge within the 760 × 1150 mm footprint.
The verified facts contain no maintenance schedule, service intervals, or accessory/cable list for this model. Controller options are described only generically in the controller digest; the delivered controller variant and any recorder must be confirmed on the order documentation.