Nabertherm N 300 BO
Nabertherm N 300 BO — Thermal Cleaning Ashing.
The N 300 BO is a 300-litre chamber furnace rated to 1000 °C, purpose-built for processes with high evaporation rates of organics and for thermal cleaning by incineration. Its 550 × 700 × 780 mm chamber accepts up to 2000 units of organic loading, with a 20-unit output burner supporting controlled burn-off. It sits in the BO series alongside the larger NB 650 BO.
Nabertherm Chamber Furnaces N(B) .. BO for Processes with High Evaporation Rates of Organics or for thermal cleaning by incineratio Series — Model Comparison & Selection
| Model | Chamber volume, L | Max temperature, °C |
|---|---|---|
| N 300 BO Current | 300 | 1000 |
| NB 650 BO | 650 | 1000 |
Full specifications
| Chamber volume | 300 l |
| Output burner in mfr | 20 |
| Inner dimensions (W × D × H) mfr | 550 × 700 × 780 mm |
| Outer dimensions (W × D × H) mfr | 1350 × 1450 × 1750 mm |
| Max. loading weight of organic substances mfr | 2000 |
| Max temperature | 1000 °C |
Description
Construction and series positioning
- The N 300 BO is a chamber furnace with a 300 l working volume and a maximum temperature of 1000 °C, configured specifically for high-evaporation organic processes and thermal cleaning by incineration.
- Inner chamber dimensions are 550 × 700 × 780 mm (W × D × H); the outer envelope is 1350 × 1450 × 1750 mm.
- Within the BO series it is the smaller sibling to the NB 650 BO; the N 300 BO is the choice when the 300 l chamber and its 2000-unit organic loading limit cover the batch, while the NB 650 BO serves larger batches.
Process behaviour
- The furnace is rated for a maximum loading weight of organic substances of 2000, which sets the batch size for incineration/evaporation duty.
- An output burner rated at 20 supports the burn-off of organic loads; the 1000 °C ceiling bounds the thermal cleaning process.
- No digitized curve points were supplied, so heat-up and cooling behaviour cannot be quantified from the available facts.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and the MyNabertherm app, including process data storage and temperature uniformity/AMS2750F instrumentation types, but it does not print model-specific wiring or setpoints for the N 300 BO.
- The remaining attached documents (fiber optics glass, foundry, dental) cover other product lines and contain no actionable facts for this model.
Integration & Operating Notes
The furnace is rated for a maximum loading weight of organic substances of 2000. Exceeding this charge mass during incineration or high-evaporation processing overloads the burn-off duty the chamber and output burner were sized for; batch the organics to stay at or below the stated limit.
The maximum temperature of the N 300 BO is 1000 °C. Thermal cleaning and evaporation cycles must be programmed so the chamber never runs above this ceiling; the controller setpoint and any over-temperature protection should be configured accordingly.
The controller digest describes the Nabertherm 500-series controllers and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but prints no model-specific wiring or parameter set for the N 300 BO. Confirm the delivered controller configuration against the order before commissioning.
Selection & Integration Q&A
Pick the N 300 BO when the batch fits its 300 l chamber and stays within the 2000 organic loading limit at up to 1000 °C. The NB 650 BO is the larger sibling for bigger batches; no further NB 650 BO data is available in the supplied facts.
The supplied controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but gives no model-specific settings for the N 300 BO; verify the delivered configuration at commissioning.