Nabertherm N 660/G
Nabertherm N 660/G — Forced Convection.
The N 660/G is a brick-insulated forced-convection chamber furnace with a 660 l chamber (600 × 1100 × 1000 mm) rated to 900 °C, positioned in the N-series between the N 300/G and N 500/GS. Its 3-phase connection and 26 W heating power are the only electrical data supplied; the large chamber suits batch stress-relieving of glass. No curves, certificates or applications are documented.
Nabertherm Brick-Insulated Chamber Furnaces for Cooling/Relieving Stresses in Glass | Nabertherm Series — Model Comparison & Selection
| Model | Chamber volume, L | Heating power, W | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|---|
| N 660/G Current | 660 | 26 | 950 | 3-phase | 900 |
| N 300/G | 300 | 15 | 450 | 3-phase | 900 |
Full specifications
| Chamber volume | 660 l |
| Electrical connection | 3-phase |
| Heating power | 26 watt |
| Inner dimensions (W × D × H) mfr | 600 × 1100 × 1000 mm |
| Outer dimensions (W × D × H) mfr | 1000 × 1750 × 1830 mm |
| Weight | 950 kg |
| Max temperature | 900 °C |
Description
Construction and series position
- Brick-insulated chamber furnace, 660 l internal volume, inner dimensions 600 × 1100 × 1000 mm (W × D × H).
- Outer dimensions 1000 × 1750 × 1830 mm; unit weight 950 kg.
- Within the N-series, this is the largest listed modification: the N 300/G and N 500/GS are the smaller siblings. No data is provided for those siblings, so selection between them cannot be quantified from these facts.
- Maximum working temperature 900 °C.
Electrical and thermal behavior
- Electrical connection: 3-phase. The only power figure supplied is 26 W, which is not consistent with a 660 l furnace at 900 °C; treat the heating-power value as unverified and size the supply from the nameplate, not from this card.
- No digitized curve points, heating/cooling rates or uniformity data are available for this model; behavior under load cannot be characterized from the supplied facts.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it prints no furnace model codes; controller fit for the N 660/G is not confirmed by these documents.
- The other attached digests (fiber-optics glass, foundry, dental) cover other product lines and contain no N 660/G-specific installation or operating facts.
Integration & Operating Notes
The only heating-power value in the supplied specification is 26 W, which is physically implausible for a 660 l chamber at 900 °C. The supply, protection and cable cross-section must be taken from the unit nameplate and the 3-phase connection data, not from this card; undersizing risks tripping or cable overheating.
The controller document describes 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but prints no furnace model codes. Confirm the controller variant and any recorder option against the N 660/G order before specifying data logging or uniformity classes.
The maximum temperature is 900 °C; no overtemperature or uniformity data is supplied for this model. Process recipes for glass stress-relieving must stay within this ceiling, and any setpoint above it requires a different furnace model rather than re-rating this one.
Selection & Integration Q&A
Pick the N 660/G when the batch needs the 660 l chamber (600 × 1100 × 1000 mm) at up to 900 °C. The N 300/G and N 500/GS are smaller siblings, but no capacity or power data for them is supplied, so compare their nameplates directly before deciding.
It is a 3-phase unit, but the only power figure supplied (26 W) is implausible for 660 l at 900 °C. Size the feeder, breaker and cable from the nameplate; do not use the 26 W value for supply design.
The attached controller digest covers 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but names no furnace models. Controller fit and recorder options for the N 660/G must be confirmed at order; no accessories are listed as included.