Nabertherm NA 1500/45
Nabertherm ·Made in Germany · In Active Production

Nabertherm NA 1500/45

Nabertherm NA 1500/45 — Forced Convection.

The NA 1500/45 is a forced-convection chamber furnace with a 1500-litre chamber (1000 × 1500 × 1000 mm) and a maximum temperature of 450 °C, electrically heated via a 3-phase connection. Its 3600 circulation and 36 heating values distinguish it within the series, where the N 1500/85HA offers higher temperature and the NA 4000/45 larger volume. It is intended for uniform heat treatment of large loads in industrial processes.

Full specifications

Core Performance & Functional Specifications
Chamber volume 1500 l
Chamber volume 1500 l
Electrical connection 3-phase
Electrical connection 3-phase
Circulation mfr 3600
Heating mfr 36
Inner dimensions (W × D × H) mfr 1000 × 1500 × 1000 mm
Outer dimensions (W × D × H) mfr 2015 × 2650 × 1700 mm
Operating Conditions, Environment & Protection
Max temperature 450 °C
Max temperature 450 °C

Description

Construction and positioning

Behavior and media

Installation, control and operation

Integration & Operating Notes

Electrical
Three-phase supply required; verify site power availability

The furnace is specified for a 3-phase electrical connection. The verified facts do not state voltage, current or power, so the site supply and protective devices must be confirmed against the nameplate and Nabertherm's project documentation before installation.

Factory Specification Sheet
Process Limits
Do not exceed 450 °C chamber temperature

The maximum temperature is 450 °C. Operating above this limit is outside the verified specification and may damage the furnace or invalidate process results. Temperature control setpoints and over-temperature protection should be configured accordingly.

Factory Specification Sheet
Control & I/O
Controller and process-data functions are documented separately

Nabertherm's controller documentation covers the 500-series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but does not specify which controller is fitted to the NA 1500/45. Confirm the delivered control configuration and any recorder options with the order documentation.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the NA 1500/45 rather than the N 1500/85HA or the NA 4000/45?

Choose the NA 1500/45 for a 1500-litre load at up to 450 °C with forced convection. The N 1500/85HA is the 1500-litre alternative when higher temperature is needed; the NA 4000/45 is the larger 4000-litre chamber at the same 450 °C limit.

What supply and control infrastructure must be provided for this furnace?

A 3-phase electrical supply is required; voltage, current and power are not stated in the verified facts and must be taken from the nameplate and project documentation. The controller is not specified in the supplied documents, so the control cabinet and any process-data recording must be confirmed with Nabertherm.

What maintenance schedule and accessories are defined for this model?

The supplied documents contain no maintenance intervals, error codes or accessory lists for the NA 1500/45. Consumables, cables and controller options are not described in the verified facts and should be requested from Nabertherm as part of the order specification.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF