No photo available yet
Nabertherm NA 250/85
Nabertherm NA 250/85 — Forced Convection Furnaces.
The NA 250/85 is a forced-convection chamber furnace with a 250-litre chamber (600 × 750 × 600 mm) and a maximum temperature of 850 °C, electrically heated and connected to a 3-phase supply. Within the NA series it is the mid-volume, high-temperature modification, positioned between the smaller NA 60/85 and the larger NA 500/45. It is intended for processes requiring uniform temperature distribution and controlled cooling in a 250-litre working volume.
Nabertherm NA Series — Model Comparison & Selection
Full specifications
| Chamber volume | 250 l |
| Chamber volume | 250 l |
| Chamber volume | 250 l |
| Chamber volume | 250 l |
| Chamber volume | 250 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating mfr | 20 |
| Heat-up time3 mfr | 180 |
| Cool-down time3 from Tmax mfr | 180 |
| Inner dimensions (W × D × H) mfr | 600 × 750 × 600 mm |
| Outer dimensions (W × D × H) mfr | 1260 × 1700 × 1810 mm |
| Weight | 840 kg |
| Weight | 840 kg |
| Weight | 840 kg |
| Weight | 840 kg |
| Weight | 840 kg |
| Max temperature | 850 °C |
| Max temperature | 850 °C |
| Max temperature | 850 °C |
| Max temperature | 850 °C |
| Max temperature | 850 °C |
Description
Construction and positioning
- Chamber volume: 250 l; inner dimensions 600 × 750 × 600 mm (W × D × H).
- Maximum temperature: 850 °C; electrically heated with a 3-phase connection.
- Outer dimensions: 1260 × 1700 × 1810 mm; weight: 840 kg.
- Within the NA series, this model offers a larger chamber than the NA 60/85 and NA 120/65, and a higher maximum temperature than the NA 500/45 (which is limited to 450 °C). It is the choice when a 250-litre workload must reach 850 °C with forced air circulation.
Thermal behaviour
- The factory data list a heat-up time of 180 (unit not stated) and cool-down times from Tmax of 900 and 180 (units not stated). Because the time units and the conditions for these values are not specified in the verified facts, they are not interpreted here; the user should refer to the original datasheet for the exact time basis.
- No digitized curve points are available for this model, so no temperature-uniformity or load-dependent behaviour can be quantified from the provided facts.
Control and operation
- The attached controller document covers Nabertherm series 500 controllers and the MyNabertherm app, including process data storage and AMS2750F instrumentation types. It does not specify a particular controller for the NA 250/85; the controller configuration must be selected separately.
- No installation or connection details specific to this model are present in the document digests; the general controller documentation is the only control-related source.
Integration & Operating Notes
The furnace is designed for a 3-phase electrical connection. The exact voltage, current and power ratings are not stated in the verified facts, so the site electrical supply and protection devices must be confirmed against the original nameplate or datasheet before installation.
The controller document describes series 500 controllers and the MyNabertherm app, including data storage and AMS2750F instrumentation types, but does not assign a specific controller to the NA 250/85. The controller, any recorder, and the associated cabling must be specified as separate items when ordering.
The maximum temperature of 850 °C is the upper limit for this model. Operating above this limit risks damage to the heating elements, insulation and chamber components, and may invalidate the manufacturer's warranty. The controller should be configured with an appropriate over-temperature limit.
Selection & Integration Q&A
Choose the NA 250/85 when you need a 250-litre chamber at up to 850 °C. The NA 60/85 offers only 60 litres at the same 850 °C, while the NA 500/45 provides 500 litres but is limited to 450 °C. The NA 250/85 balances volume and temperature for mid-size loads.
The furnace is connected to a 3-phase supply. The verified facts do not state voltage, current or power, so the exact supply rating and circuit protection must be taken from the nameplate or original datasheet. Confirm the site's 3-phase availability before installation.
The base delivery does not include a controller, recorder or process documentation; these are separate selections from the series 500 controller range and MyNabertherm app options. No maintenance schedule or consumable list is provided in the verified facts, so service intervals must be obtained from the manufacturer's manual.