Nabertherm NE 40
Nabertherm NE 40 — Chamber kilns.
The NE 40 is a 40-litre chamber kiln heated from two sides, rated to 1300 °C with a 2.9 kW single-phase connection. Its 350 × 330 × 350 mm chamber and 95 kg frame place it as the smallest standard size in the two-sided-heating chamber kiln line. It is intended for laboratory and small-batch thermal treatment where uniform side heating matters more than throughput.
Full specifications
| Chamber volume | 40 l |
| Electrical connection | 1-phase |
| Nominal power | 2.9 kW |
| Inner dimensions (W × D × H) mfr | 350 × 330 × 350 mm |
| Outer dimensions (W × D × H) mfr | 640 × 800 mm |
| Weight | 95 kg |
| Max temperature | 1300 °C |
Description
Construction and series position
- Chamber kiln with heating elements on two sides of the 350 × 330 × 350 mm (W × D × H) chamber; 40 l working volume.
- Outer dimensions 640 × 800 mm (W × D); 95 kg unit mass.
- Single-phase electrical connection at 2.9 kW nominal power, 1300 °C maximum temperature.
- No sibling models were supplied for this series, so no direct size comparison can be asserted; the NE 40 is the only configuration documented here.
Thermal behaviour
- The two-sided heating arrangement is the defining feature of the series; no curve points or uniformity data were provided for this model, so no heat-up rate or temperature-distribution figure can be stated.
- Maximum working temperature is 1300 °C; the 2.9 kW input is the only power figure given and applies to the single-phase connection as listed.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it prints no furnace model sizes or ordering codes; controller fitment for the NE 40 is therefore not confirmed by the supplied documents.
- The remaining attached digests (fiber-optics glass, foundry, dental) cover other product lines and contain no NE 40 data.
Integration & Operating Notes
The kiln is listed as a 1-phase unit drawing 2.9 kW nominal; the supply circuit, protective device and cable cross-section must be sized for that load and for the inrush of resistive heating elements, and no other high-draw equipment should share the circuit.
The 1300 °C figure is the maximum temperature of this model; operating above it risks element and insulation damage. No separate continuous-versus-peak rating is given, so treat 1300 °C as the absolute ceiling for any program.
Selection & Integration Q&A
Pick the NE 40 when 40 l and 1300 °C cover the batch and a 2.9 kW single-phase supply is available. No sibling sizes are documented in the supplied facts, so larger chambers cannot be compared numerically here; confirm alternatives with the manufacturer.
A dedicated single-phase circuit sized for 2.9 kW, plus a controller from the Nabertherm 500 series or MyNabertherm app ecosystem. The controller document does not map specific controller models to the NE 40, so the exact controller and any recorder must be confirmed at ordering.
No maintenance intervals, spare parts or accessory list is present in the supplied facts. The controller and app functions described in the controller digest are separate items and are not confirmed as part of the base delivery; request the accessory and service schedule from the manufacturer.