Nabertherm NW 300
Nabertherm NW 300 — Chamber kilns.
The NW 300 is a 300-litre chamber kiln heated from five sides, with a 550 × 700 × 780 mm chamber and 1300 °C maximum temperature. Its 20 kW three-phase connection and 590 kg construction place it as the mid-size drawer/shuttle modification, below the NW 440 in chamber volume. It serves batch heat-treatment and firing processes requiring uniform five-sided heating.
Full specifications
| Chamber volume | 300 l |
| Chamber volume | 300 l |
| Chamber volume | 300 l |
| Chamber volume | 300 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating power | 20 watt |
| Heating power | 20 watt |
| Heating power | 20 watt |
| Nominal power | 20 kW |
| Inner dimensions (W × D × H) mfr | 550 × 700 × 780 mm |
| Outer dimensions (W × D × H) mfr | 930 × 1320 × 1760 mm |
| Weight | 590 kg |
| Weight | 590 kg |
| Weight | 590 kg |
| Weight | 590 kg |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
| Max temperature | 1300 °C |
Description
Construction and series positioning
- The NW 300 is a drawer/shuttle kiln with a 300 l chamber (550 × 700 × 780 mm internal, 930 × 1320 × 1760 mm external) and 590 kg mass.
- Within the series it sits below the NW 440 sibling in chamber volume; the five-sided heating architecture is common to the line.
- Heating is from five sides, which distinguishes this family from single-side-heated chamber kilns.
Thermal behaviour
- Maximum operating temperature is 1300 °C; nominal connected power is 20 kW on a three-phase supply.
- No digitized curve points were supplied, so heat-up rate and uniformity data cannot be stated here.
Installation and control
- The attached document digests cover controller series 500 and the MyNabertherm app, process-data storage, and AMS2750F instrumentation types, but contain no model-specific wiring or commissioning data for the NW 300.
- No NW 300-specific manual facts on connection, control or operation were available in the supplied digests.
Integration & Operating Notes
The 20 kW nominal power on a three-phase connection sets the upstream breaker, cable cross-section and transformer allocation. Confirm the plant voltage and frequency match the ordered variant before installation, since the facts do not state a voltage.
The kiln weighs 590 kg empty; add the workpiece charge and any drawer/shuttle handling equipment. Verify the floor or platform rating and the 930 × 1320 × 1760 mm footprint clearance before positioning.
Workpieces, setters and thermocouples must be rated for the 1300 °C maximum. Exceeding this temperature risks damage to the five-sided heating elements and invalidates results; no over-temperature margin is stated in the facts.
Selection & Integration Q&A
Pick the NW 300 when the 300 l chamber (550 × 700 × 780 mm) and 20 kW connected load fit your batch size and supply. The NW 440 offers more chamber volume; the facts give no further NW 440 data, so compare charge geometry and power availability directly.
It is a three-phase unit with 20 kW nominal power. Size the feeder, breaker and cable for the full 20 kW connected load and confirm the plant voltage and frequency against the ordered variant; the facts do not state a specific voltage.
The facts confirm only the kiln itself. Controller series 500, MyNabertherm app, process-data storage and AMS2750F instrumentation are covered in a separate controller document and are not confirmed as base-delivery items; specify them at order.