Nabertherm Q 400 D
Nabertherm Q 400 D — Compact Quenching.
The Q 400 D is a single-phase compact quenching unit in Nabertherm's Combination Baths line, built to a 2480 mm total height with a 40 kg maximum load weight and 0.3 kW connected load. It is intended for quenching and heat-treatment bath duty where a tall, floor-standing bath with a defined load limit is required.
Full specifications
| Electrical connection | 1-phase |
| Connected mfr | 0.3 |
| Total height | 2480 millimeter |
| Max. load weight mfr | 40 |
Description
Construction and positioning
- The Q 400 D is a floor-standing combination bath with a total height of 2480 mm, distinguishing it from lower-profile bath units in the same line.
- Electrical connection is single-phase; the connected load is stated as 0.3 kW.
- The maximum load weight is 40 kg, which sets the working limit for quench baskets, charge carriers and fixtures.
Behavior and duty
- No digitized curve points or temperature-uniformity data are available for this model, so no cooling-rate or uniformity figures are asserted here.
- The 40 kg load limit and 0.3 kW connected load define the practical operating envelope: the unit is a bath/quench station, not a high-power heating furnace.
Installation and control
- The attached controller documentation covers Nabertherm's 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types; these are controller-platform facts, not model-specific Q 400 D ratings.
- The foundry and dental brochures in the document set describe other furnace families and do not contain Q 400 D data; they are not used to specify this model.
Integration & Operating Notes
The maximum load weight is 40 kg. Exceeding it risks deformation of the charge carrier, spillage of hot bath media and mechanical damage to the bath; account for the weight of baskets, fixtures and quench media carried on the load, not just the workpiece.
Selection & Integration Q&A
Choose the Q 400 D when you need a 2480 mm tall, single-phase bath with a 40 kg charge limit and a 0.3 kW connected load. No sibling models are listed in the verified data, so compare height, load limit and connected load against other series members before ordering.
The verified data lists no maintenance intervals, consumables or included accessories. Controller and recorder options are described only in Nabertherm's separate controller documentation, so confirm the supplied controller scope and any service schedule with the manufacturer before commissioning.