Nabertherm RSRC 80/500/11
Nabertherm RSRC 80/500/11 — Tube furnaces.
The RSRC 80/500/11 is a rotary tube furnace with an 80 mm max outer tube diameter and a 500 mm heated length, operating up to 1100 °C on a 3-phase supply. Its 1540 mm tube length and constant-temperature zones of 170 mm and 250 mm distinguish it within the RSRC series for continuous-movement thermal processing.
Nabertherm RSRC Series — Model Comparison & Selection
| Model | Max temperature, °C | Weight, kg | Electrical connection |
|---|---|---|---|
| RSRC 80/500/11 Current | 1100 | 305 | 3-phase |
| RSRC 120/750/13 | 1300 | 340 | 3-phase |
Full specifications
| Electrical connection | 3-phase |
| Max. outer mfr | 80 |
| Heated mfr | 500 |
| Connected mfr | 6.7 |
| Outer dimensions (W × D × H) mfr | 1770 × 1050 × 1310 mm |
| Weight | 305 kg |
| Length constant mfr | 170 |
| Length constant mfr | 250 |
| Tube length mfr | 1540 |
| Max temperature | 1100 °C |
Description
Construction and series positioning
- The RSRC 80/500/11 is the smaller-bore, lower-temperature member of the RSRC rotary tube furnace series; the sibling RSRC 120/750/13 offers a 120 mm tube and 1300 °C capability.
- This model accepts tubes up to 80 mm outer diameter with a 500 mm heated length, supported over a total tube length of 1540 mm.
- The unit weighs 305 kg and measures 1770 × 1050 × 1310 mm (W × D × H), requiring floor space and structural support appropriate for a stationary laboratory furnace.
Thermal behavior and process zones
- Maximum operating temperature is 1100 °C, below the 1300 °C ceiling of the larger sibling, making this model suited to processes that do not require the highest series temperature.
- Two constant-temperature lengths are listed—170 mm and 250 mm—indicating distinct uniform zones along the 500 mm heated section; the applicable zone depends on the process configuration and tube loading.
- No digitized curve points are available for this model, so heat-up and cooling profiles must be established empirically or obtained from Nabertherm.
Electrical and control integration
- The furnace connects to a 3-phase supply with a connected load of 6.7 (unit not stated in the source; verify with factory specification).
- Controller documentation covers the Nabertherm 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types; the specific controller configuration for this unit is not detailed in the supplied digests.
- No installation, connection, or operating specifics for this model appear in the attached PDF digests; those documents address other product lines (controllers, fiber optics glass, foundry, dental).
Integration & Operating Notes
The maximum temperature is 1100 °C and the maximum outer tube diameter is 80 mm. Exceeding either limit risks tube failure, heater damage, or invalid process results; the sibling RSRC 120/750/13 is required for 120 mm tubes or 1300 °C operation.
Selection & Integration Q&A
Choose the 80/500/11 for tubes up to 80 mm OD and processes at or below 1100 °C with a 500 mm heated length. The 120/750/13 is needed for 120 mm tubes, 1300 °C, or a 750 mm heated length.
The furnace is 3-phase with a connected value of 6.7 (unit not stated). Verify whether this is kW with Nabertherm and size the supply, fusing, and disconnect accordingly; no further electrical data is given in the supplied facts.
The supplied documents do not specify maintenance intervals, spare parts, or included accessories for this model. Controller options, recorders, and app connectivity are described separately; confirm the delivered scope and service schedule with Nabertherm.