No photo available yet

Nabertherm ·Made in Germany · In Active Production

Nabertherm SAH 5600/..

Nabertherm SAH 5600/.. — Forced Convection Furnaces.

The SAH 5600/.. is a forced-convection pit-type furnace with a 5600 l chamber, designed for top-loading of heavy charges up to 5000 kg. Its 2700 × 3000 × 3900 mm outer envelope and 3-phase electrical connection define the installation footprint. It serves as a large-capacity batch furnace for uniform heat treatment of bulky loads.

Full specifications

Core Performance & Functional Specifications
Chamber volume 5600 l
Electrical connection 3-phase
Heating mfr 120
Outer dimensions (W × D × H) mfr 2700 × 3000 × 3900 mm
Electrical, Power & Drive Specifications
Max. charging weight mfr 5000

Description

Construction and positioning

Behavior under load

Installation and control

Integration & Operating Notes

Mounting
Pit excavation must match the 2700 × 3000 mm footprint

The furnace outer envelope is 2700 × 3000 × 3900 mm; the pit and surrounding structure must be sized to this envelope with access for crane loading from above. Verify foundation load capacity against the furnace weight, which is not stated in the verified facts.

Factory Specification Sheet
Process Limits
Charging weight must not exceed 5000 kg

The maximum charging weight is 5000 kg. Loads, fixtures, and any basket or grid must be included in this figure; exceeding it risks damage to the hearth and charging equipment. Confirm the weight of the charge plus tooling before every loading cycle.

Factory Specification Sheet
Electrical
Three-phase supply required; rating not stated in verified facts

The furnace is connected to a 3-phase supply. The connected load, voltage, and current are not given in the verified facts; obtain the electrical data sheet from the factory before sizing cables, fuses, and the upstream disconnect.

Factory Specification Sheet
Control & I/O
Controller platform supports series 500 and MyNabertherm app

The controller documentation covers Nabertherm series 500 controllers and the MyNabertherm app, including process data storage and AMS2750F instrumentation types. These are platform capabilities; the actual controller configuration for this furnace must be confirmed at order.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the SAH 5600/.. rather than a smaller or differently configured furnace in the series?

Choose this model when the charge requires a 5600 l chamber and weighs up to 5000 kg, loaded from above by crane. No sibling models are listed in the verified facts, so compare chamber volume and charging weight against other SAH sizes using the factory selection guide.

What supply and upstream protection does the 3-phase connection require?

The furnace uses a 3-phase connection, but the verified facts do not state voltage, connected load, or current. Size cables, fuses, and the disconnect only after obtaining the electrical data sheet from the factory; do not assume a rating from the model code.

What maintenance and accessories are not included in the base delivery?

The verified facts list no maintenance schedule, spare parts, or included accessories. Controller options such as recorders and AMS2750F instrumentation are documented separately and should be specified at order; consult the furnace manual for service intervals.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF